AFCT-5745NPZ/UPZ
Family of Single-Mode SFP Transceivers for Long Reach SONET OC-48
and SDH/STM-16 with Digital Diagnostic Monitoring (DMI) Interface
Part of the Avago METRAK family
Data Sheet
Description
Features
The AFCT-5745Z are high performance, cost effective mod-
ules for serial optical data communications applications
that range from 125 Mb/s to 2.7 Gb/s. They are designed to
provide SONET/SDH compliant connections for 2488 Mb/s
at links up to 40 km and 80 km. All modules are designed
for single mode fiber and operate at a nominal wavelength
of 1300 nm. The transmitter section of the AFCT-5745NPZ
incorporates a 1300 nm Distributed Feedback (DFB) laser.
The transmitter in the AFCT-5745UPZ uses a 1550 nm Dis-
tributed Feedback (DFB) Laser.
•
•
RoHS-6 Compliant
Compliant with SFF-8472, internally calibrated diag-
nostic monitoring for optical transceivers
- Transceiver optical output power
- Receiver average optical power
- Laser bias current
- Device temperature
- Supply voltage
Compliant with SFF-8074i SFP transceiver specifica-
tion
Compliant with ITU-T G957 STM-16
L-16.1 (40km) and L-16.2 (80km)
Compliant with Telcordia GR253
LR-1 (40km) and LR-2 (80km)
Class 1 CDRH/IEC 825 eye safety compliant
Operating case temperature:
–10 °C to +85 °C
–40 °C to +85 °C
Multitrate operation from 125 Mb/s to 2.7 Gb/s
LC duplex fiber connector
•
•
•
For each device the receiver section uses an Avalanche
Photodiode (APD). A positive-ECL logic interface simplifies
interface to external circuitry.
The AFCT-5745Z adds digital diagnostic monitoring to
standard SFP functionality, enabling fault isolation, com-
ponents monitoring and failure prediction capabilities.
•
•
The diagnostic features allow the host to observe real
time temperature, supply voltage, laser bias current, laser
average output power and received input average power
through the legacy SFP two wire serial memory interface.
Conventional memory information found in legacy SFPs is
also available in these enhanced transceivers.
•
•
•
Manufactured in an ISO 9001 compliant facility
Hot-plugging is ensured by design and by 3-stage pin
sequencing at the electrical interface.
Applications
•
•
•
•
•
•
SONET ADMs (Add/Drop Multiplexers)
Multi-Service Edge & Aggregation Platforms
ATM switches and routers
SONET/SDH switch infrastructure
xDSL applications
Part Number Options
TheAFCT-5745ZSFPfamilyconsistsofthefollowingproducts:
Part
Number
AFCT-5745NPZ
AFCT-5745ANPZ
AFCT-5745UPZ
AFCT-5745AUPZ
Link
Tempe-
rature*
Extended
Industrial
Extended
Industrial
Latch
Design
Bail
Bail
Bail
Distance
40km
40km
80km
80km
Metro edge switching
Related Products
Bail
•
•
AFCT-5765xZ family of OC3 SFP transceivers with DMI
AFCT-5755xZ family of OC12 SFP transceivers with
DMI
*
Extended Temperature Range is -10 to 85 °C
Industrial Temperature Range is -40 to 85 °C