Car Camera Bus Transmitter
with Parallel Video Input
ADV7992/ADV7993
Data Sheet
General
FEATURES
2-wire serial microprocessor unit (MPU) interface
(compatible with I2C) capable of operating in master or
slave mode
−40°C to +105°C temperature grade
32-lead and 40-lead LFCSP packages
AEC-Q100 qualified for automotive applications
C2B transmits video and bidirectional control data over a
differential pair cable up to 30 meters or single-ended
cable up to 15 meters
The parallel video input formats supported include
8-/10-/12-bit interleaved Y/C data up to 148.5 MHz
2 × 8-bit separate Y/C data up to 74.25 MHz
Embedded (SAV/EAV codes), separate HS/VS/DE or ISP
line/frame valid type external timing signals
HD video formats supported up to 2 megapixels at 30 Hz or
1 megapixel at 60 Hz
Bidirectional control channel embedded in the C2B link for
control and status data between C2B receiver and C2B
transmitter
Enables remote configuration from the C2B receiver
Bidirectional GPIO with either local or remote interfacing
possibilities
APPLICATIONS
Automotive camera modules
Automotive camera ECUs
Automotive infotainment head units
SIMPLIFIED FUNCTIONAL BLOCK DIAGRAM
VIDEO TEST
INTERNAL
PATTERN
GENERATOR
OSCILLATOR
VIDEO/
TIMING
INPUT
Y/C
VIDEO
AND
CONTROL
DATA
PROCESSOR
2
INTERRUPT
CONTROLLER
C B
C2B
TRANSMITTER
On-chip high resolution, high speed DAC, buffer and
filtering blocks for video and control channel path
Transmission of frame count data from ISP to enable the
back-end ECU or head unit to detect stuck or skipped
frames
SYNCS
2
I C
GPIO
CONTROLLER
MASTER/
SLAVE
POR
Video test pattern generator for simplified system testing
Protection from high voltages encountered during short to
battery (STB) fault condition
2
I C SLAVE,
GPIO
RESET
2
I C MASTER
Tested to industry standards for automotive EMC/EMI/ESD
robustness
Figure 1.
Complete technical specifications are available for the C2B transmitters and receivers. Contact c2b_web_support@analog.com to complete
the nondisclosure agreement (NDA) required to receive additional product information.
C2B U.S. patents 10,623,692 B2; 10,645,337 B1; and 10,462,413 B1.
Rev. SpA
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2019–2020 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com