APIX2 Receiver with LVDS, HDCP,
and MIPI Support
Data Sheet
ADV7782
FEATURES
APPLICATIONS
APIX2 receiver with HDCP
Automotive high end head unit
Automotive infotainment
Portable devices
The approved use of the ADV7782 device is limited to use
cases where the ADV7782 data output is directly input to a
processing unit
High-bandwidth Digital Content Protection (HDCP) 1.4
support with internal preprogrammed HDCP keys HDCP
decryption of video and audio
HDCP repeater support
Supports 2 independent video streams
One TDM channel with support for up to 4 stereo pairs
Up to 3000 Mbps sustained downstream link bandwidth
Up to 187.5 Mbps upstream link bandwidth
Media independent interface (MII), serial port interface (SPI),
I2C, and GPIO interfaces for sideband communication
LVDS receiver (OpenLDI)
GENERAL DESCRIPTION
The ADV7782 is a receiver that is compatible with an APIX® or
APIX2® serial data stream. The ADV7782 performs limited
processing (color space conversion and interpolation 4:2:2 to 4:4:4),
and forwards the data via MIPI® camera serial interface (CSI).
Data from the LVDS input (OpenLDI) can also be routed through
the same processing blocks. It supports a point-to-point connection
topology, and supports HDCP repeater implementations with a
key selection vector (KSV) list memory of 25 entries.
85 MHz maximum clock frequency
Maximum resolution supported is WXGA
Supports receiving video in both 24-bit mode over 4
differential pairs, and 18-bit mode over 3 differential pairs
Dual MIPI CSI 2.0 transmitters
MIPI-A: clock and 4 data lanes
MIPI-B: clock and 2 data lanes
Video processing
Color space conversion
4:2:2 to 4:4:4 interpolation
Software driver
There are three primary video sources: LVDS OpenLDI, APIX
Channel 0, and APIX Channel 1. These three primary video
streams are input to a video switch matrix. Any two of the three
streams can be selected and output from the switch matrix.
Of the two video channels output from the video switch matrix,
one output channel is unprocessed, and the other output channel
passes through a combination of an interpolation block (4:2:2 to
4:4:4) and a color space converter.
MISRA-C compliant software driver for automotive acceptability
General
Qualified for automotive applications
−40°C to +85°C temperature grade
100-ball, 9 mm × 9 mm, RoHS-compliant CSP_BGA package
For more information about the ADV7782, including the
complete data sheet, contact your local Analog Devices, Inc., sales
office at www.analog.com/sales.
FUNCTIONAL BLOCK DIAGRAM
ADV7782
2
MII
I C MASTER
GPIO
SPI
2
I C SLAVE
INT
ASHELL
DIGITAL
PLL
KSV LIST MEM
HDCP
I2S TDM
APIX2
RECEIVER
PLL
D-PHY
XBAR
SERIALIZER
+
CSC
+
HDCP
MIPI-A INTERFACE
INTERPOLATION
+
TESTPATGEN
PLL
D-PHY
OpenLDI LVDS
RECEIVER
SERIALIZER
MIPI-B INTERFACE
Figure 1.
Rev. SpA
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2014 Analog Devices, Inc. All rights reserved.
www.analog.com