300 MHz, 32 × 32 Buffered
Analog Crosspoint Switch
ADV3200/ADV3201
FEATURES
FUNCTIONAL BLOCK DIAGRAM
VPOS VNEG DVCC DGND
Large, 32 × 32, nonblocking switch array
G = +1 (ADV3200) or G = +2 (ADV3201) operation
Pin-compatible 32 × 16 versions available
(ADV3202/ADV3203)
Single 5 V supply, dual 2.5 V supply, or
dual 3.3 V supply (G = +2)
Serial programming of switch array
2:1 OSD insertion mux per output
Input sync-tip clamp
High impedance output disable allows connection of
multiple devices with minimal output bus load
Excellent video performance
CLK
193-BIT SHIFT REGISTER
193
DATA
OUT
DATA IN
UPDATE
CS
ADV3200
(ADV3201)
PARALLEL LATCH
192
RESET
32
32 × 5:32
ENABLE/
BYPASS
ENABLE/
DISABLE
DECODERS
OUTPUT
BUFFER
G = +1
SYNC-TIP
CLAMP
1024
(G = +2)
60 MHz, 0.1 dB gain flatness
0.1% differential gain error (RL = 150 Ω)
0.1° differential phase error (RL = 150 Ω)
Excellent ac performance
SWITCH
MATRIX
OSD
MUX
.
.
.
.
.
.
.
.
.
.
.
.
32
INPUTS
32
OUTPUTS
Bandwidth: >300 MHz
Slew rate: >400 V/μs
Low power: 1.25 W
Low all hostile crosstalk of −48 dB @ 5 MHz
Reset pin allows disabling of all outputs
Connected through a capacitor to ground, provides
power-on reset capability
32
32
REFERENCE
176-lead exposed pad LQFP (24 mm × 24 mm)
VCLAMP
OSD
OSD
VREF
INPUTS SWITCHES
APPLICATIONS
Figure 1.
CCTV surveillance
Routing of high speed signals including
Composite video (NTSC, PAL, S, SECAM)
RGB and component video routing
Compressed video (MPEG, Wavelet)
Video conferencing
GENERAL DESCRIPTION
The ADV3200/ADV3201 are 32 × 32 analog crosspoint switch
matrices. They feature a selectable sync-tip clamp input for
ac-coupled applications and an on-screen display (OSD)
insertion mux. With −48 dB of crosstalk and −80 dB isolation
at 5 MHz, the ADV3200/ADV3201 are useful in many high
density routing applications. The 0.1 dB flatness out to 60 MHz
makes the ADV3200/ADV3201 ideal for composite video
switching.
an output bus if building a larger array. The part is available
in a gain of +1 (ADV3200) or +2 (ADV3201) for ease of use in
back-terminated load applications. A single 5 V supply, dual
2.5 V supplies, or dual 3.3 V supplies (G = +2) can be used
while consuming only 250 mA of idle current with all outputs
enabled. The channel switching is performed via a double
buffered, serial digital control, which can accommodate daisy
chaining of several devices.
The 32 independent output buffers of the ADV3200/ADV3201
can be placed into a high impedance state for paralleling cross-
point outputs so that off channels present minimal loading to
The ADV3200/ADV3201 are packaged in a 176-lead exposed
pad LQFP (24 mm × 24 mm) and are available over the
extended industrial temperature range of −40°C to +85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2008 Analog Devices, Inc. All rights reserved.