Data Sheet
ADuM4165/ADuM4166
5.7 kV RMS Digital Isolators for Isolated USB 2.0 High, Full, and Low Speed
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
► USB 2.0 signaling with automatic detection of low, full, and high
speed connections
► 1.5 Mbps, 12 Mbps, and 480 Mbps data rates
► Bidirectional USB isolator for upstream or downstream ports
► Redriving and high speed data retiming for input jitter removal
and an open eye
► Flexible clock input options
► 4.5 V to 5.5 V VBUSx or 3 V to 3.6 V operation on each side
► 21 mA typical idle, low or full speed mode supply current
► 48 mA typical idle, high speed mode supply current
► Ultra low power standby in USB 2.0 suspend (L2) or disconnect
► 1.7 mA typical low power standby, upstream supply current
► 20 μA typical low power standby, downstream supply current
Figure 1. ADuM4165 Clock Input from Host Side
► ±8000 V IEC 61000-4-2 ESD protection across the isolation
barrier
► Passed CISPR32/EN55032 Class B emissions
► High common-mode transient immunity: 50 kV/μs typical
► Safety and regulatory approvals (pending)
► UL (pending): 5700 V rms for 1 minute per UL 1577
► CSA Component Acceptance Notice 5A (pending)
► IEC 62368-1, IEC 61010-1 and IEC60601-1
► VDE certificate of conformity (pending)
► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01
► VIORM = 849 VPEAK
► Operating temperature range: −55°C to +125°C
Figure 2. ADuM4166 Clock Input from Peripheral Side
GENERAL DESCRIPTION
The ADuM4165/ADuM41661 are USB 2.0 port isolators, utilizing
Analog Devices, Inc., iCoupler® technology to dynamically support
all USB 2.0 data rates; low (1.5 Mbps), full (12 Mbps), or high
(480 Mbps), as required. The devices support host isolation with
automatic speed negotiation as well as peripheral isolation.
► 20-lead, wide-body, increased creepage SOIC_IC package with
8.3 mm creepage and clearance
APPLICATIONS
► USB peripheral, USB host, and USB hub isolation
► Electronic test and measurement equipment
► Medical devices and integrated PCs
► Industrial PCs and isolated USB ports for debug or upgrade
► USB isolator modules and USB cable isolators
High speed data is retimed for jitter reduction, requiring an external
clock signal or crystal input. The ADuM4165 supports the clock or
crystal input on the upstream side, and the ADuM4166 supports the
clock or crystal input on the downstream side, offering two options
to best suit the system design.
The low power standby mode for downstream (Side 2) supports
applications with limited available power, such as battery-operated
peripherals. The upstream (Side 1) standby current meets USB 2.0
requirements for suspended operation.
The isolators are specified over an extended industrial temperature
range of −55°C to +125°C and are available in a 20-lead, wide-
body, increased creepage SOIC_IC with 8.3 mm creepage and
clearance.
1
Protected by U.S. Patents 7,075,329; 8,432,182; 8,525,547; and 8,564,327. Other patents are pending.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT