Blackfin
Embedded Processor
ADSP-BF534/ADSP-BF536/ADSP-BF537
FEATURES
PERIPHERALS
Up to 600 MHz high performance Blackfin processor
Two 16-bit MACs, two 40-bit ALUs, four 8-bit video ALUs,
40-bit shifter
RISC-like register and instruction model for ease of
programming and compiler-friendly support
Advanced debug, trace, and performance monitoring
Wide range of operating voltages (see Operating Conditions
on Page 23)
Qualified for Automotive Applications (see Automotive Prod-
ucts on Page 66)
Programmable on-chip voltage regulator
182-ball and 208-ball CSP_BGA packages
IEEE 802.3-compliant 10/100 Ethernet MAC (ADSP-BF536 and
ADSP-BF537 only)
Controller area network (CAN) 2.0B interface
Parallel peripheral interface (PPI), supporting ITU-R 656
video data formats
2 dual-channel, full-duplex synchronous serial ports
(SPORTs), supporting 8 stereo I2S channels
12 peripheral DMAs, 2 mastered by the Ethernet MAC
2 memory-to-memory DMAs with external request lines
Event handler with 32 interrupt inputs
Serial peripheral interface (SPI) compatible
2 UARTs with IrDA support
2-wire interface (TWI) controller
MEMORY
Eight 32-bit timer/counters with PWM support
Real-time clock (RTC) and watchdog timer
32-bit core timer
48 general-purpose I/Os (GPIOs), 8 with high current drivers
On-chip PLL capable of frequency multiplication
Debug/JTAG interface
Up to 132K bytes of on-chip memory
Instruction SRAM/cache and instruction SRAM
Data SRAM/cache plus additional dedicated data SRAM
Scratchpad SRAM (see Table 1 on Page 3 for available
memory configurations)
External memory controller with glueless support for SDRAM
and asynchronous 8-bit and 16-bit memories
Flexible booting options from external flash, SPI and TWI
memory or from SPI, TWI, and UART host devices
Memory management unit providing memory protection
VOLTAGE REGULATOR
JTAG TEST AND EMULATION
PERIPHERAL ACCESS BUS
WATCHDOG TIMER
RTC
INTERRUPT
CONTROLLER
CAN
B
TWI
PORT J
SPORT0
SPORT1
PPI
L1
L1
DATA
DMA
CONTROLLER
INSTRUCTION
MEMORY
GPIO
PORT G
MEMORY
UART0-1
SPI
DMA CORE BUS
EXTERNAL ACCESS BUS
GPIO
PORT F
EXTERNAL PORT
FLASH, SDRAM CONTROL
TIMER7-0
ETHERNET MAC
(See Table 1)
GPIO
PORT H
16
BOOT ROM
Figure 1. Functional Block Diagram
Blackfin and the Blackfin logo are registered trademarks of Analog Devices, Inc.
Rev. J Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 U.S.A.
Tel: 781.329.4700
Technical Support
©2014 Analog Devices, Inc. All rights reserved.
www.analog.com