ADS8512
www.ti.com ...................................................................................................................................................................................................... SLAS485–JUNE 2008
12-Bit, 40-kSPS, Low Power Sampling ANALOG-TO-DIGITAL CONVERTER
with Internal Reference and Serial Interface
1
FEATURES
APPLICATIONS
•
•
•
•
•
•
Industrial Process Control
Test Equipment
Robotics
DSP Servo Control
Medical Instrumentation
Portable Data Acquisition Systems
234
•
40-kHz Minimum Sampling Rate
•
•
Very Low Power: 25 mW
±3.33-V, ±5-V, ±10-V, 4-V, and 10-V Input
Ranges
•
•
•
•
•
•
•
•
73.9-dB SINAD with 10-kHz Input
±0.5 LSB Max INL
±0.5 LSB Max DNL, 12-Bit NMC
±5-mV BPZ, ±2 ppm/°C BPZ Drift
72-dB Min SINAD, 80-dB Min SFDR
Uses Internal or External 2.5-V Reference
No External Calibration Resistors Required
Single 5-V Analog Supply:
DESCRIPTION
The ADS8512 is a complete low-power, single 5-V
supply, 12-bit sampling analog-to-digital (A/D)
converter.
It
contains
a
complete
12-bit
capacitor-based, successive approximation register
(SAR) A/D converter with sample-and-hold (S/H),
clock, reference, and serial data interface. The
converter can be configured for a variety of input
ranges including ±10 V, ±5 V, 0 V to 10 V, and 0.5 V
to 4.5 V. A high-impedance, 0.3-V to 2.8-V input is
also available with input impedance greater than 10
MΩ. For most input ranges, the input voltage can
swing to 25 V or –25 V without damage to the
converter.
–
–
32.5-mW Max Power Dissipation
50-µW Max Power-Down Mode
•
•
•
•
SPI™-Compatible Serial Port up to 20MHz,
with Master/Slave Feature
Global CONV and 3-Stated Bus for Multi-Chip
Simultaneous S/H Operation
Pin-Compatible with ADS7812 and 16-Bit
ADS7813/8513
An SPI-compatible serial interface allows data to be
synchronized to an internal or external clock. The
ADS8512 is specified at 40-kHz sampling rate over
the –40°C to +85°C industrial temperature range.
SO-16 Package
SuccessiveApproximation Register
Clock
EXT/INT
CDAC
40 kW
8 kW
R1
R2
IN
PWRD
BUSY
CS
Serial
Data
Out
IN
CONV
SDATA
DATACLK
20 kW
and
Control
R3
IN
Comparator
BUF
CAP
Buffer
4 kW
Internal
REF
+2.5 V Ref
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
4
TMS320 is a trademark of Texas Instruments.
SPI is a trademark of Motorola, Inc.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated