5秒后页面跳转
ADS7924IRTER PDF预览

ADS7924IRTER

更新时间: 2024-10-01 06:36:27
品牌 Logo 应用领域
德州仪器 - TI 转换器模数转换器
页数 文件大小 规格书
42页 669K
描述
2.2V, 12-Bit, 4-Channel, microPOWER™ ANALOG-TO-DIGITAL CONVERTER WITH I2C INTERFACE

ADS7924IRTER 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFN
包装说明:HVQCCN, LCC16,.12SQ,20针数:16
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:6 weeks
风险等级:1.24最大模拟输入电压:5.5 V
最小模拟输入电压:转换器类型:ADC, SUCCESSIVE APPROXIMATION
JESD-30 代码:S-PQCC-N16JESD-609代码:e4
长度:3 mm最大线性误差 (EL):0.0366%
湿度敏感等级:2模拟输入通道数量:4
位数:12功能数量:1
端子数量:16最高工作温度:85 °C
最低工作温度:-40 °C输出位码:BINARY
输出格式:SERIAL封装主体材料:PLASTIC/EPOXY
封装代码:HVQCCN封装等效代码:LCC16,.12SQ,20
封装形状:SQUARE封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
峰值回流温度(摄氏度):260电源:1.8/5,2.5/5 V
认证状态:Not Qualified采样速率:0.1 MHz
座面最大高度:0.8 mm子类别:Analog to Digital Converters
最大压摆率:0.008 mA最小供电电压:1.65 V
标称供电电压:5 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:NO LEAD
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:3 mm
Base Number Matches:1

ADS7924IRTER 数据手册

 浏览型号ADS7924IRTER的Datasheet PDF文件第2页浏览型号ADS7924IRTER的Datasheet PDF文件第3页浏览型号ADS7924IRTER的Datasheet PDF文件第4页浏览型号ADS7924IRTER的Datasheet PDF文件第5页浏览型号ADS7924IRTER的Datasheet PDF文件第6页浏览型号ADS7924IRTER的Datasheet PDF文件第7页 
ADS7924  
www.ti.com  
SBAS482A JANUARY 2010REVISED MAY 2010  
2.2V, 12-Bit, 4-Channel, microPOWER™  
ANALOG-TO-DIGITAL CONVERTER WITH I2C INTERFACE  
Check for Samples: ADS7924  
1
FEATURES  
DESCRIPTION  
234  
Intelligent Monitoring:  
The  
ADS7924  
is  
a
four-channel,  
12-bit,  
analog-to-digital converter (ADC) with an I2C™  
interface. With its low-power ADC core, support for  
low-supply operation, and a flexible measurement  
sequencer that essentially eliminates power  
consumption between conversions, the ADS7924  
forms a complete monitoring system for power-critical  
applications such as battery-powered equipment and  
energy harvesting systems.  
Auto-Sequencing of 4-Channel Multiplexer  
Individual Alarm Thresholds for Each  
Channel  
Programmable Scan Rate  
Micropower Monitoring:  
Four-Channel Scanning:  
Every 1ms 25mW  
The ADS7924 features dedicated data registers and  
onboard programmable digital threshold comparators  
for each input. Alarm conditions can be programmed  
that generate an interrupt. The combination of data  
buffering, programmable threshold comparisons, and  
alarm interrupts minimize the host microcontroller  
time needed to supervise the ADS7924.  
Every 10ms 5mW  
< 1µA of Power-Down Current  
Programmable Interrupt Pin Controls  
Shutdown/Wakeup of the Microcontroller  
Auto Power-Down Control  
PWRCON Pin Allows Shutdown of External  
Op Amp  
The four-channel input multiplexer (MUX) is routed  
through external pins to allow a common signal  
conditioning circuit to be used between the MUX and  
ADC, thereby reducing overall component count. The  
low-power ADC uses the analog supply as its  
reference and can acquire and convert signals in only  
10ms. An onboard oscillator eliminates the need to  
supply a master clock.  
Wide Supply Range:  
Analog Supply: 2.2V to 5.5V  
Digital Supply: 1.65V to 5.5V  
Small Footprint: 3mm × 3mm QFN  
APPLICATIONS  
The ADS7924 is offered in a small 3mm × 3mm QFN  
and is fully specified for operation over the industrial  
temperature range of –40°C to +85°C.  
Portable and Battery-Powered Systems:  
Medical, Communications, Remote Sensor  
Signal Monitoring, Power-Supply  
Monitoring  
Energy Harvesting  
MUX OUT  
ADCIN  
AVDD  
DVDD  
SDA  
I2C  
Interface  
SCL  
CH0  
CH1  
Data Buffers,  
Sequencer, and  
Alarms  
A0  
INT  
4-Channel  
MUX  
SAR  
ADC  
CH2  
CH3  
PWRCON  
RESET  
Oscillator  
AGND  
DGND  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
3
4
microPOWER is a trademark of Texas Instruments Incorporated.  
I2C is a trademark of NXP Semiconductors.  
All other trademarks are the property of their respective owners.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2010, Texas Instruments Incorporated  

ADS7924IRTER 替代型号

型号 品牌 替代类型 描述 数据表
ADS7924IRTET TI

完全替代

2.2V, 12-Bit, 4-Channel, microPOWER™ ANALOG-T

与ADS7924IRTER相关器件

型号 品牌 获取价格 描述 数据表
ADS7924IRTET TI

获取价格

2.2V, 12-Bit, 4-Channel, microPOWER™ ANALOG-T
ADS7945 TI

获取价格

14-Bit, 2 MSPS, Dual-Channel, Differential/Single-Ended, Ultralow-Power Analog-to-Digital
ADS7945_14 TI

获取价格

14-Bit, 2 MSPS, Dual-Channel, Differential/Single-Ended, Ultralow-Power Analog-to-Digital
ADS7945SRTER TI

获取价格

14-Bit, 2 MSPS, Dual-Channel, Differential/Single-Ended, Ultralow-Power Analog-to-Digital
ADS7945SRTET TI

获取价格

14-Bit, 2 MSPS, Dual-Channel, Differential/Single-Ended, Ultralow-Power Analog-to-Digital
ADS7946 TI

获取价格

14-Bit, 2 MSPS, Dual-Channel, Differential/Single-Ended, Ultralow-Power Analog-to-Digital
ADS7946SRTER TI

获取价格

14-Bit, 2 MSPS, Dual-Channel, Differential/Single-Ended, Ultralow-Power Analog-to-Digital
ADS7946SRTET TI

获取价格

14-Bit, 2 MSPS, Dual-Channel, Differential/Single-Ended, Ultralow-Power Analog-to-Digital
ADS7947 TI

获取价格

12/10/8-Bit 2MSPS, Dual-Channel Unipolar Pseudo-Differential Ultralow-Power SAR Analog-to-
ADS7947_14 TI

获取价格

12/10/8-Bit, 2MSPS, Dual-Channel, Unipolar, Pseudo-Differential, Ultralow-Power SAR Analog