ADS1294, ADS1294R
ADS1296, ADS1296R
ADS1298, ADS1298R
www.ti.com
SBAS459H –JANUARY 2010–REVISED OCTOBER 2011
Low-Power, 8-Channel, 24-Bit Analog Front-End for Biopotential Measurements
Check for Samples: ADS1294, ADS1294R, ADS1296, ADS1296R, ADS1298, ADS1298R
With its high levels of integration and exceptional
1
FEATURES
performance, the ADS1294/6/8/4R/6R/8R family
enables the development of scalable medical
instrumentation systems at significantly reduced size,
power, and overall cost.
23
•
Eight Low-Noise PGAs and Eight
High-Resolution ADCs (ADS1298, ADS1298R)
•
•
•
•
•
•
•
Low Power: 0.75mW/channel
Input-Referred Noise: 4μVPP (150Hz BW, G = 6)
Input Bias Current: 200pA
The ADS1294/6/8/4R/6R/8R have a flexible input
multiplexer per channel that can be independently
connected to the internally-generated signals for test,
temperature, and lead-off detection. Additionally, any
configuration of input channels can be selected for
derivation of the right leg drive (RLD) output signal.
The ADS1294/6/8/4R/6R/8R operate at data rates as
high as 32kSPS, thereby allowing the implementation
of software PACE detection. Lead-off detection can
be implemented internal to the device, either with a
pull-up/pull-down resistor or an excitation current
sink/source. Three integrated amplifiers generate the
Wilson Central Terminal (WCT) and the Goldberger
Central Terminals (GCT) required for a standard
12-lead ECG. The ADS1294R/6R/8R versions
Data Rate: 250SPS to 32kSPS
CMRR: –115dB
Programmable Gain: 1, 2, 3, 4, 6, 8, or 12
Unipolar or Bipolar Supplies:
AVDD = 2.7V to 5.25V, DVDD = 1.65V to 3.6V
•
•
Built-In Right Leg Drive Amplifier, Lead-Off
Detection, WCT, PACE Detection, Test Signals
Integrated Respiration Impedance
Measurement (ADS1294R/6R/8R only)
•
•
•
•
•
Digital PACE Detection Capability
Built-In Oscillator and Reference
Flexible Power-Down, Standby Modes
SPI™-Compatible Serial Interface
include
a fully-integrated, respiration impedance
measurement function.
Multiple ADS1294/6/8/4R/6R/8R devices can be
cascaded in high channel count systems in a
daisy-chain configuration.
Operating Temperature Range:
–40°C to +85°C
Package options include a tiny 8mm × 8mm, 64-ball
BGA and a TQFP-64. The ADS1294/6/8 BGA version
is specified over the commercial temperature range of
0°C to +70°C. The ADS1294R/6R/8R BGA and
ADS1294/6/8 TQFP versions are specified over the
industrial temperature range of –40°C to +85°C.
APPLICATIONS
•
Medical Instrumentation (ECG, EMG and EEG):
Patient monitoring; Holter, event, stress, and
vital signs including ECG, AED, telemedicine
Bispectral index (BIS), Evoked audio potential
(EAP), Sleep study monitor
REF
Test Signals and
Monitors
Reference
ADC1
ADC2
ADC3
ADC4
ADC5
ADC6
ADC7
ADC8
ADS129xR
•
High-Precision, Simultaneous, Multichannel
Signal Acquisition
RESP
DEMOD
A1
A2
A3
A4
A5
A6
A7
A8
SPI
DESCRIPTION
The ADS1294/6/8/4R/6R/8R are
multichannel,
delta-sigma (ΔΣ) analog-to-digital converters (ADCs)
with built-in programmable gain amplifiers (PGAs),
internal reference, and an onboard oscillator. The
ADS1294/6/8/4R/6R/8R incorporate all of the features
Oscillator
a
family of
MUX
Control
simultaneous
sampling, 24-bit,
To Channel
RESP
Wilson
Terminal
that
are
commonly
required
in
medical
WCT
¼
¼
electrocardiogram (ECG) and electroencephalogram
(EEG) applications.
Resp
¼
ADS129xR
RLD
PACE
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
SPI is a trademark of Motorola.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2011, Texas Instruments Incorporated