ADS1191
ADS1192
www.ti.com
SBAS566 –DECEMBER 2011
Low-Power, 2-Channel, 16-Bit Analog Front-End for Biopotential Measurements
Check for Samples: ADS1191, ADS1192
The ADS1191/2 incorporate all of the features that
1
FEATURES
are commonly required in portable, low-power
medical electrocardiogram (ECG), sports, and fitness
applications.
23
•
Two Low-Noise PGAs and
Two High-Resolution ADCs (ADS1192)
•
•
Low Power: 335 μW/channel
With its high levels of integration and exceptional
performance, the ADS1191/2 family enables the
creation of scalable medical instrumentation systems
at significantly reduced size, power, and overall cost.
Input-Referred Noise: 24 μVPP
(150-Hz BW, G = 6)
•
•
•
•
•
Input Bias Current: 1 nA
Data Rate: 125 SPS to 8 kSPS
CMRR: –95 dB
The ADS1191/2 have a flexible input multiplexer per
channel that can be independently connected to the
internally-generated signals for test, temperature, and
lead-off detection. Additionally, any configuration of
input channels can be selected for derivation of the
right leg drive (RLD) output signal. The ADS1191/2
operate at data rates up to 8 kSPS. Lead-off
detection can be implemented internal to the device,
using the device internal excitation current
sink/source.
Programmable Gain: 1, 2, 3, 4, 6, 8, or 12
Supplies: Unipolar or Bipolar
–
–
Analog: 2.7 V to 5.25 V
Digital: 1.7 V to 3.6 V
•
Built-In Right Leg Drive Amplifier, Lead-Off
Detection, Test Signals
•
•
•
•
Built-In Oscillator and Reference
The devices are packaged in a 5-mm × 5-mm, 32-pin
thin quad flat pack (TQFP). Operating temperature is
specified from –40°C to +85°C.
Flexible Power-Down, Standby Mode
SPI™-Compatible Serial Interface
REF
Operating Temperature Range: –40°C to +85°C
Test Signals and
Monitors
Reference
APPLICATIONS
SPI
•
Medical Instrumentation (ECG) including:
–
Patient monitoring; Holter, event, stress,
and vital signs including ECG, AED,
telemedicine
ADC1
ADC2
A1
A2
Oscillator
MUX
Control
–
Sports and fitness (heart rate, respiration,
and ECG)
To Channel
DESCRIPTION
The ADS1191/2 are
a family of multichannel,
simultaneous sampling, 16-bit, delta-sigma (ΔΣ)
analog-to-digital converters (ADCs) with a built-in
programmable gain amplifier (PGA), internal
reference, and an onboard oscillator.
RLD
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
SPI is a trademark of Motorola.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated