Data Sheet
ADRF5049
Silicon SP4T Switch, Nonreflective, 9 kHz to 45 GHz
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► Ultrawideband frequency range: 9 kHz to 45 GHz
► Nonreflective 50 Ω design
► Low insertion loss
► 1.3 dB to 18 GHz typical
► 2.2 dB to 40 GHz typical
► 3.3 dB to 45 GHz typical
► High isolation
► 44 dB to 18 GHz typical
► 40 dB to 40 GHz typical
► 35 dB to 45 GHz typical
► High input linearity
► P0.1dB: >30 dBm typical
► IP3: 50 dBm typical
► High RF input power
Figure 1. Functional Block Diagram
► 30 dBm through path
► 18 dBm terminated path
► No low frequency spurious
► ESD ratings
► HBM: ±2000 V for all pins
► CDM: ±500 V for all pins
► On and off time (50% VCTRL to 90% of final RFOUT): 2.7 μs
► 0.1 dB RF settling time (50% VCTRL to 0.1 dB of final RF output):
3.4 μs
GENERAL DESCRIPTION
The ADRF5049 is a nonreflective SP4T switch manufactured in the
silicon on insulator (SOI) process.
This device operates from 9 kHz to 45 GHz with an insertion loss
of lower than 3.3 dB and isolation of higher than 35 dB. The
ADRF5049 has an RF input power handling capability of 30 dBm
through path, 18 dBm terminated path, and 30 dBm hot switching at
the RF common port.
The ADRF5049 requires a dual-supply voltage of +3.3 V and
−3.3 V. The device employs complimentary metal-oxide semicon-
ductor (CMOS)-/low-voltage transistor to transistor logic (LVTTL)
logic-compatible controls.
► 3 mm x 3 mm, 24-terminal LGA package
► Pin compatible with the ADRF5042 and ADRF5043
APPLICATIONS
The ADRF5049 has enable and logic select controls to feature all
off state and mirror port selection, respectively.
► Industrial scanners
► Test instrumentation
► Cellular infrastructure—mmWave 5G
► Military radios, radars, and electronic counter measures (ECMs)
► Microwave radios and very small aperture terminals (VSATs)
The ADRF5049 is pin compatible with the ADRF5042 and
ADRF5043.
The ADRF5049 comes in a 24-terminal, 3 mm × 3 mm, RoHS
compliant, land grid array (LGA) package and can operate from
−40°C to +105°C.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT