1 A/0.6 A DC to DC Switching Regulator with
Independent Positive and Negative Outputs
Data Sheet
ADP5072
FEATURES
TYPICAL APPLICATION CIRCUIT
V
IN
Input supply voltage range: 2.85 V to 5.5 V
Generates well regulated, independently resistor
programmable VPOS and VNEG outputs
Boost regulator to generate VPOS output
Adjustable positive output to 35 V
ADP5072
L1
SS
V
POS
R
C1
SW1
SW1
COMP1
EN1
D1
C
C1
R
FT1
FB1
R
Integrated 1.0 A main switch
Inverting regulator to generate VNEG output
Adjustable negative output to −30 V
FB1
C
OUT1
PVIN
PVIN
AVIN
V
IN
PGND
PGND
VREF
C
IN
C
VREF
Integrated 0.6 A main switch
EN2
1.2 MHz/2.4 MHz switching frequency with optional external
frequency synchronization from 1.0 MHz to 2.6 MHz
Resistor programmable soft start timer
Slew rate control for lower system noise
Individual precision enable and flexible start-up sequence
control for symmetric start, VPOS first, or VNEG first
Out of phase operation
C
R
OUT2
FB2
R
C2
FB2
COMP2
R
FT2
C
C2
SYNC
SLEW
SEQ
SW2
V
NEG
D2
AGND
L2
Figure 1.
UVLO, OCP, OVP, and TSD protection
1.61 mm × 2.18 mm, 20-ball WLCSP
−40°C to +125°C junction temperature range
APPLICATIONS
Bipolar amplifiers, analog-to-digital converters (ADCs),
digital-to-analog converters (DACs), and multiplexers
Charge coupled device (CCD) bias supplies
Optical module supplies
RF power amplifier bias
Time of flight module supplies
GENERAL DESCRIPTION
The ADP5072 is a dual, high performance dc-to-dc regulator that
generates independently regulated positive and negative rails.
Other key safety features in the ADP5072 include overcurrent
protection (OCP), overvoltage protection (OVP), thermal
shutdown (TSD), and input undervoltage lockout (UVLO).
The input voltage range of 2.85 V to 5.5 V supports a wide
variety of applications. The integrated main switch in both
regulators enables generation of an adjustable positive output
voltage up to 35 V and a negative output voltage down to −30 V.
The ADP5072 is available in a 20-ball WLCSP and is rated for a
−40°C to +125°C junction temperature range.
Table 1. Family Models
Boost
Inverter
The ADP5072 operates at a pin selected 1.2 MHz or 2.4 MHz
switching frequency. The ADP5072 can synchronize with an
external oscillator from 1.0 MHz to 2.6 MHz to ease noise filtering
in sensitive applications. Both regulators implement programma-
ble slew rate control circuitry for the MOSFET driver stage to
reduce electromagnetic interference (EMI). Flexible start-up
sequencing is provided with the options of manual enable,
simultaneous mode, positive supply first, and negative supply first.
Model
Switch (A) Switch (A) Package
ADP5070 1.0
0.6
1.2
20-lead LFCSP (4 mm× 4 mm) and
20-lead TSSOP
20-lead LFCSP (4 mm × 4 mm) and
20-lead TSSOP
ADP5071 2.0
ADP5072 1.0
ADP5073 N/A
ADP5074 N/A
ADP5075 N/A
0.6
1.2
2.4
0.8
20-ball WLCSP (1.61 mm × 2.18 mm)
16-lead LFCSP (3 mm × 3 mm)
16-lead LFCSP (3 mm × 3 mm)
12-ball WLCSP (1.61 mm × 2.18 mm)
The ADP5072 includes a fixed internal or resistor programmable
soft start timer to prevent inrush current at power-up.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2019 Analog Devices, Inc. All rights reserved.
www.analog.com