2 A/1.2 A DC-to-DC Switching Regulator with
Independent Positive and Negative Outputs
Data Sheet
ADP5071
FEATURES
TYPICAL APPLICATION CIRCUIT
Wide input supply voltage range: 2.85 V to 15 V
Generates well regulated, independently resistor
programmable VPOS and VNEG outputs
Boost regulator to generate VPOS output
Adjustable positive output to 39 V
ADP5071
SS
INBK
R
C1
L1
D1
COMP1
V
POS
C
C1
SW1
FB1
EN1
C
R
VREG
FT1
VREG
Integrated 2.0 A main switch
C
OUT1
R
FB1
Optional single-ended primary-inductor converter
(SEPIC) configuration for automatic step-up/step-down
Inverting regulator to generate VNEG output
Adjustable negative output to VIN − 39 V
Integrated 1.2 A main switch
True shutdown for both positive and negative outputs
1.2 MHz/2.4 MHz switching frequency with optional external
frequency synchronization from 1.0 MHz to 2.6 MHz
Resistor programmable soft start timer
PVIN1
PVIN2
PVINSYS
V
IN
PGND
VREF
C
IN1
C
VREF
EN2
R
FB2
C
OUT2
R
C2
FB2
COMP2
R
FT2
C
C2
SYNC/FREQ
SLEW
SW2
V
NEG
D2
SEQ
AGND
L2
Slew rate control for lower system noise
Individual precision enable and flexible start-up sequence
control for symmetric start, VPOS first, or VNEG first
Out-of-phase operation
Figure 1.
UVLO, OCP, OVP, and TSD protection
4 mm × 4 mm, 20-lead LFCSP and 20-lead TSSOP
−40°C to +125°C junction temperature range
Supported by the ADIsimPower tool set
APPLICATIONS
Bipolar amplifiers, ADCs, DACs, and multiplexers
Charge-coupled device (CCD) bias supply
Optical module supply
RF power amplifier (PA) bias
GENERAL DESCRIPTION
The ADP5071 is a dual high performance dc-to-dc regulator that
generates independently regulated positive and negative rails.
The ADP5071 includes a fixed internal or resistor programmable
soft start timer to prevent inrush current at power-up. During
shutdown, both regulators completely disconnect the loads from
the input supply to provide a true shutdown.
The input voltage range of 2.85 V to 15 V supports a wide variety of
applications. The integrated main switch in both regulators enables
generation of an adjustable positive output voltage up to +39 V
and a negative output voltage down to −39 V below input voltage.
Other key safety features in the ADP5071 include overcurrent
protection (OCP), overvoltage protection (OVP), thermal
shutdown (TSD), and input undervoltage lockout (UVLO).
The ADP5071 operates at a pin selected 1.2 MHz/2.4 MHz
switching frequency. The ADP5071 can synchronize with an
external oscillator from 1.0 MHz to 2.6 MHz to ease noise
filtering in sensitive applications. Both regulators implement
programmable slew rate control circuitry for the MOSFET
driver stage to reduce electromagnetic interference (EMI).
The ADP5071 is available in a 20-lead LFCSP or in a 20-lead
TSSOP and is rated for a −40°C to +125°C junction temperature
range.
Table 1. Family Models
Model
Boost Switch (A)
Inverter Switch (A)
Flexible start-up sequencing is provided with the options of
manual enable, simultaneous mode, positive supply first, and
negative supply first.
ADP5070
ADP5071
1.0
2.0
0.6
1.2
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2015 Analog Devices, Inc. All rights reserved.
www.analog.com