Datasheet > ADP5063

ADP5063

更新时间： 2024-02-19 04:43:31

品牌	Logo	应用领域
亚德诺 - ADI		电池
页数	文件大小	规格书
44页	830K
描述
Linear LiFePO4 Battery Charger with Power Path and USB Compatibility in LFCSP

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

ADP5063 数据手册

Linear LiFePO₄Battery Charger with

Power Path and USB Compatibility in LFCSP

ADP5063

Data Sheet

FEATURES

GENERAL DESCRIPTION

Default charging termination voltage at 3.6 V

The ADP5063 charger is fully compliant with USB 3.0 and the

Fully compatible with USB 3.0 and USB Battery Charging 1.2

Compliance Plan Specification

Operating input voltage from 4 V to 6.7 V

Tolerant input voltage from −0.5 V to +20 V (USB VBUS)

Fully programmable via I²C

Flexible digital control inputs

Up to 2.1 A current from an ac charger in LDO mode

Built-in current sensing and limiting

As low as 55 mΩ battery isolation FET between battery and

charger output

Thermal regulation prevents overheating

Compliant with JEITA1 and JEITA2 Li-Ion battery charging

temperature specifications

SYS_EN flag permits the system to be disabled until battery is at

the minimum required level for guaranteed system start-up

4 mm × 4 mm LFCSP package

USB Battery Charging 1.2 Compliance Plan Specification, and

enables charging via the mini USB VBUS pin from a wall charger,

car charger, or USB host port.

The ADP5063 operates from a 4 V to 6.7 V input voltage range but

is tolerant of voltages up to 20 V, thereby alleviating concerns about

USB bus spikes during disconnection or connection scenarios.

The ADP5063 features an internal field effect transistor (FET)

between the linear charger output and the battery. This permits

battery isolation and, therefore, system powering under a dead

battery or no battery scenario, which allows immediate system

function upon connection to a USB power supply.

Based on the type of USB source, which is detected by an external

USB detection chip, the ADP5063 can be set to apply the correct

current limit for optimal charging and USB compliance.

The ADP5063 has three factory-programmable digital input/out-

put pins that provide maximum flexibility for different systems.

These digital input/output pins permit a combination of features,

such as input current limits, charging enable and disable, charging

current limits, and a dedicated interrupt output pin.

APPLICATIONS

Single cell lithium iron phosphate (LiFePO₄) portable

equipment

Portable medical devices

Portable instrumentation devices

Portable consumer devices

TYPICAL APPLICATION CIRCUIT

ADP5063

SYSTEM

ISO_Sx

VBUS

VINx

CBP

AC OR

USB

22µF

10µF

100nF

SCL

SDA

ISO_Bx

CHARGER

CONTROL

BLOCK

22µF

BAT_SNS

DIG_IO1

DIG_IO2

DIG_IO3

Li-Ion

THR

SYS_EN

ILED

VLED

AGND

Figure 1.

Rev. 0

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

Technical Support

www.analog.com

12 3 4 5 6 7...44

中文翻译

下载PDF

与ADP5063相关器件

型号	品牌	获取价格	描述	数据表
ADP5063ACPZ-1-R7	ADI	获取价格	Linear LiFePO4 Battery Charger with Power Path and USB Compatibility in LFCSP
ADP5063CP-EVALZ	ADI	获取价格	Linear LiFePO4 Battery Charger with Power Path and USB Compatibility in LFCSP
ADP5065	ADI	获取价格	Fast Charge Battery Manager with Power Path and USB Compatibility
ADP5065ACBZ-1-R7	ADI	获取价格	Fast Charge Battery Management with Power Path and USB Compatibility
ADP5065ACBZ-1-R7	ROCHESTER	获取价格	1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PBGA20, 2.75 X 2.08 MM, 0.50 MM PITCH, WLCSP-20
ADP5065CB-EVALZ	ADI	获取价格	Fast Charge Battery Manager with Power Path and USB Compatibility
ADP5-06SJ2-V3SJ1	SAMTEC	获取价格	RF Connector Adapter
ADP5-06SJ2-V3SP1	SAMTEC	获取价格	RF Connector Adapter
ADP5-06SP2-V3SJ1	SAMTEC	获取价格	RF N Connector
ADP5-06SP2-V3SP1	SAMTEC	获取价格	RF N Connector

与ADP5063相关文章

BSS138LT3G：一款高效能N沟道MOSFET的全面解析
2024-07-04

10
解读EGP10B二极管资料手册：产品特性、参数分析
2024-07-04

10
RT9164AGG手册资料详解：引脚信息、设计指南
2024-07-04

12
2SA1037KPT资料详解：产品特性、电气参数、设计指南
2024-07-04

14

产品中心

服务支持

精选活动

关于我们

帮助中心

ADP5063

ADP5063 数据手册

与ADP5063相关器件

与ADP5063相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ADP5063

ADP5063 数据手册

与ADP5063相关器件

与ADP5063相关文章

您还可以找

您在本页遇到什么问题？