Datasheet > ADP5062ACPZ-2-R7

ADP5062ACPZ-2-R7

更新时间： 2024-11-26 21:10:43

品牌	Logo	应用领域
亚德诺 - ADI		电池
页数	文件大小	规格书
45页	900K
描述
Linear Li-Ion Battery Charger with Power Path and USB Compatibility in LFCSP

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

ADP5062ACPZ-2-R7 数据手册

Linear Li-Ion Battery Charger with Power

Path and USB Compatibility in LFCSP

Data Sheet

ADP5062

FEATURES

GENERAL DESCRIPTION

4 mm × 4 mm LFCSP package

Fully programmable via I²C

Flexible digital control inputs

The ADP5062 charger is fully compliant with USB 3.0 and the

USB Battery Charging Specification 1.2 and enables charging

via the mini USB VBUS pin from a wall charger, car charger, or

Up to 2.1 A current from an ac charger in LDO mode

Operating input voltage from 4.0 V to 6.7 V

Tolerant input voltage from −0.5 V to +20 V (USB VBUS)

Fully compatible with USB 3.0 and USB Battery Charging

Specification 1.2

Built-in current sensing and limiting

As low as 54 mΩ battery isolation FET between battery and

charger output

Thermal regulation prevents overheating

Compliant with JEITA 1 and JEITA 2 Li-Ion battery charging

temperature specifications

SYS_EN flag permits the system to be disabled until battery is at

the minimum required level for guaranteed system start-up

USB host port.

The ADP5062 operates from a 4 V to 6.7 V input voltage range

but is tolerant of voltages up to 20 V thereby alleviating concerns

about USB bus spikes during disconnect or connect scenarios.

The ADP5062 features an internal FET between the linear

charger output and the battery. This permits battery isolation

and, hence, system powering under a dead battery or no battery

scenario, which allows for immediate system function on connec-

tion to a USB power supply.

Based on the type of USB source, which is detected by an external

USB detection chip, the ADP5062 can be set to apply the correct

current limit for optimal charging and USB compliance.

The ADP5062 has three factory-programmable digital input/out-

put pins that provide maximum flexibility for different systems.

These digital input/output pins permit combinations of features

such as, input current limits, charging enable and disable, charging

current limits, and a dedicated interrupt output pin.

APPLICATIONS

Digital still cameras

Digital video cameras

Single cell Li-Ion portable equipment

PDAs, audio, and GPS devices

Portable medical devices

Mobile phones

TYPICAL APPLICATION CIRCUIT

ADP5062

SYSTEM

ISO_Sx

VBUS

VIN

AC OR

USB

CBP

22µF

10µF

10nF

SCL

SDA

ISO_Bx

CHARGER

CONTROL

BLOCK

22µF

BAT_SNS

DIG_IO1

DIG_IO2

DIG_IO3

Li-ion

THR

SYS_EN

ILED

VLED

AGND

Figure 1.

Rev. B

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registeredtrademarks arethe property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Technical Support

www.analog.com

12 3 4 5 6 7...45

中文翻译

下载PDF

与ADP5062ACPZ-2-R7相关器件

型号	品牌	获取价格	描述	数据表
ADP5062CP-EVALZ	ADI	获取价格	Linear Li-Ion Battery Charger with Power Path and USB Compatibility in LFCSP
ADP5063	ADI	获取价格	Linear LiFePO4 Battery Charger with Power Path and USB Compatibility in LFCSP
ADP5063ACPZ-1-R7	ADI	获取价格	Linear LiFePO4 Battery Charger with Power Path and USB Compatibility in LFCSP
ADP5063CP-EVALZ	ADI	获取价格	Linear LiFePO4 Battery Charger with Power Path and USB Compatibility in LFCSP
ADP5065	ADI	获取价格	Fast Charge Battery Manager with Power Path and USB Compatibility
ADP5065ACBZ-1-R7	ADI	获取价格	Fast Charge Battery Management with Power Path and USB Compatibility
ADP5065ACBZ-1-R7	ROCHESTER	获取价格	1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PBGA20, 2.75 X 2.08 MM, 0.50 MM PITCH, WLCSP-20
ADP5065CB-EVALZ	ADI	获取价格	Fast Charge Battery Manager with Power Path and USB Compatibility
ADP5-06SJ2-V3SJ1	SAMTEC	获取价格	RF Connector Adapter
ADP5-06SJ2-V3SP1	SAMTEC	获取价格	RF Connector Adapter

与ADP5062ACPZ-2-R7相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

45
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

34
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

62
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

59

产品中心

服务支持

精选活动

关于我们

帮助中心

ADP5062ACPZ-2-R7

ADP5062ACPZ-2-R7 数据手册

与ADP5062ACPZ-2-R7相关器件

与ADP5062ACPZ-2-R7相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ADP5062ACPZ-2-R7

ADP5062ACPZ-2-R7 数据手册

与ADP5062ACPZ-2-R7相关器件

与ADP5062ACPZ-2-R7相关文章

您还可以找

您在本页遇到什么问题？