ADP3211, ADP3211A
7-Bit, Programmable,
Single-Phase, Synchronous
Buck Controller
The ADP3211 is a highly efficient, single−phase, synchronous
buck switching regulator controller. With its integrated driver, the
ADP3211 is optimized for converting the notebook battery voltage to
the supply voltage required by high performance Intel chipsets. An
internal 7−bit DAC is used to read a VID code directly from the
chip−set or the CPU and to set the GMCH render voltage or the CPU
core voltage to a value within the range of 0 V to 1.5 V.
http://onsemi.com
QFN32
The ADP3211 uses a multi−mode architecture. It provides
programmable switching frequency that can be optimized for
efficiency depending on the output current requirement. In addition,
the ADP3211 includes a programmable load line slope function to
adjust the output voltage as a function of the load current so that the
core voltage is always optimally positioned for a load transient. The
ADP3211 also provides accurate and reliable current overload
protection and a delayed power−good output. The IC supports
on−the−fly (OTF) output voltage changes requested by the chip−set.
The ADP3211 has a boot voltage of 1.1 V for IMVP−6.5
applications in CPU mode. The ADP3211A has a boot voltage of
1.2 V in CPU mode.
MN SUFFIX
CASE 488AM
32
1
MARKING DIAGRAM
1
xxxxxx
xxxxxx
AWLYYWW
The ADP3211 is specified over the extended commercial temperature
range of −10°C to 100°C and is available in a 32−lead QFN.
xxx = Specific Device Code
= Assembly Location
WL = Wafer Lot
A
Features
YY = Year
WW = Work Week
• Single−Chip Solution
®
♦ Fully Compatible with the Intel IMVP−6.5t CPU and GMCH
Chipset Voltage Regulator Specifications Integrated MOSFET
Drivers
PIN ASSIGNMENT
• Input Voltage Range of 3.3 V to 22 V
•
7 mV Worst−Case Differentially Sensed Core Voltage Error
Overtemperature
• Automatic Power−Saving Modes Maximize Efficiency During
Light Load Operation
• Soft Transient Control Reduces Inrush Current and Audio Noise
• Independent Current Limit and Load Line Setting Inputs for
Additional Design Flexibility
PWRGD
IMON
CLKEN
FBRTN
FB
VCC
1
BST
DRVH
SW
ADP3211
ADP3211A
(top view)
PVCC
DRVL
PGND
GND
• Built−in Power−Good Masking Supports Voltage Identification
(VID) OTF Transients
COMP
GPU
• 7−Bit, Digitally Programmable DAC with 0 V to 1.5 V Output
• Short−Circuit Protection
ILIM
• Current Monitor Output Signal
• This is a Pb−Free Device
• Fully RoHS Compliant
• 32−Lead QFN
ORDERING INFORMATION
Applications
See detailed ordering and shipping information in the package
dimensions section on page 31 of this data sheet.
• Notebook Power Supplies for Next Generation Intel Chipsets
• Intel Netbook Atom Processors
©
Semiconductor Components Industries, LLC, 2009
1
Publication Order Number:
April, 2009 − Rev. 0
ADP3211/D