1.2 A, Low VIN, Low Dropout
Linear Regulator
Data Sheet
ADP1754/ADP1755
FEATURES
TYPICAL APPLICATION CIRCUITS
V
IN
= 1.8V
V
= 1.5V
OUT
Maximum output current: 1.2 A
Input voltage range: 1.6 V to 3.6 V
Low shutdown current: <2 µA
Very low dropout voltage: 105 mV @ 1.2 A load
Initial accuracy: 1%
Accuracy over line, load, and temperature: 2%
7 fixed output voltage options with soft start
0.75 V to 2.5 V (ADP1754)
4.7µF
4.7µF
14
VIN VIN VOUT VOUT
13
16
15
1 VIN
2 VIN
3 VIN
4 EN
VOUT 12
ADP1754
TOP VIEW
(Not to Scale)
VOUT 11
VOUT 10
SENSE 9
100kΩ
PG
Adjustable output voltage option with soft start
0.75 V to 3.3V (ADP1755)
High PSRR
PG GND SS NC
7
8
5
6
65 dB @ 1 kHz
10nF
65 dB @ 10 kHz
54 dB @ 100 kHz
Figure 1. ADP1754 with Fixed Output Voltage, 1.5 V
23 μV rms at 0.75 V output
V
= 1.8V
V
= 0.5V(1 + R1/R2)
IN
OUT
Stable with small 4.7 µF ceramic output capacitor
Excellent load and line transient response
Current-limit and thermal overload protection
Power-good indicator
Logic-controlled enable
Reverse current protection
4.7µF
4.7µF
14
VIN VIN VOUT VOUT
13
16
15
1 VIN
2 VIN
3 VIN
4 EN
VOUT 12
ADP1755
TOP VIEW
(Not to Scale)
VOUT 11
VOUT 10
100kΩ
R1
APPLICATIONS
PG
ADJ
PG GND SS NC
9
Server computers
Memory components
R2
7
8
5
6
Telecommunications equipment
Network equipment
10nF
DSP/FPGA/microprocessor supplies
Instrumentation equipment/data acquisition systems
Figure 2. ADP1755 with Adjustable Output Voltage, 0.75 V to 3.3 V
GENERAL DESCRIPTION
voltages that range from 0.75 V to 3.3 V via an external divider.
The ADP1754/ADP1755 allow an external soft start capacitor
to be connected to program the startup. A digital power-good
output allows power system monitors to check the health of the
output voltage.
The ADP1754/ADP1755 are low dropout (LDO) CMOS linear
regulators that operate from 1.6 V to 3.6 V and provide up to
1.2 A of output current. These low VIN/VOUT LDOs are ideal for
regulation of nanometer FPGA geometries operating from 2.5 V
down to 1.8 V I/O rails, and for powering core voltages down to
0.75 V. Using an advanced proprietary architecture, the ADP1754/
ADP1755 provide high power supply rejection ratio (PSRR) and
low noise, and achieve excellent line and load transient response
with only a small 4.7 µF ceramic output capacitor.
The ADP1754/ADP1755 are available in a 16-lead, 4 mm × 4 mm
LFCSP, making them not only very compact solutions, but also
providing excellent thermal performance for applications that
require up to 1.2 A of output current in a small, low profile
footprint.
The ADP1754 is available in seven fixed output voltage options.
The ADP1755 is the adjustable version, which allows output
Rev. E
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
5秒后页面跳转
全球首块英伟达H200交付 黄仁勋“送货上门”
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
