Data Sheet
ADMV9623
60 GHz Millimeterwave Short Data Link
FEATURES
GENERAL DESCRIPTION
► Meets V-band worldwide frequency requirements
► Integrated omnidirectional circularly polarized antenna
► 12 dBi gain and ±20° half power beamwidth typical
► 20 dBm equivalent isotropic radiated power typical
► RoHS compliant
► Integrated high band and low band diplexer for improved multi-
path distortion
► Full duplex operation
The ADMV9623 is a complete millimeterwave (mmWave) wireless
connectivity solution in a small printed circuit assembly (PCA)
format. All millimeterwave signals are confined to the printed circuit
assembly, simplifying implementation. Wireless transmission is ach-
ieved using the integrated circularly polarized omnidirectional patch
antenna array, which enables communication in many applications,
including rotation. Following the antenna array is an integrated
diplexer that provides isolation between the separate transmit and
receive paths on the board, which reduces multipath distortion.
The receive path integrates all components to demodulate the
63.2625 GHz frequency to baseband signals. The flexible receiver
gain control is programmable over a wide range to easily accom-
modate the required link budget. The receiver baseband outputs
are dc-coupled and can provide over 500 mV of differential output
signal level. Likewise, the transmit path integrates all components
to modulate input baseband signals to 59.85 GHz. The transmitter
has programmable gain control to maintain level transmit power.
The transmit baseband inputs are dc-coupled and have a broad
common-mode input range. Synthesizers are integrated to maintain
excellent frequency stability vs. temperature. The simple amplitude
modulation (AM) scheme eliminates the need for external data con-
verters, allowing for bit rates of greater than 100 Mbps. On-board
power management is integrated to a single 5 V voltage rail to
power the ADMV9623.
► Simple AM scheme
► Data rate: 100 Mbps
► Ultralow latency
► Short link communication distance: 1 cm to 5 cm
► Receiver frequency: 63.2625 GHz
► Transmitter frequency: 59.85 GHz
► Transmitter gain setting range: −3 dB to +32 dB
► Integrated transmitter PA power detector
► Receiver gain setting range: −10 dB to +69 dB
► RF, IF, and BB gain control
► Integrated receiver and transmitter frequency synthesizers
► Integrated reference clock
► On-chip temperature sensors
► DC-coupled baseband input and output
► 3-wire digital SPI
► 34.70 mm × 29.89, 52-terminal printed circuit assembly (PCA)
Together with the ADMV9613, the ADMV9623 provides a complete
full duplexed 60 GHz data link for high speed data transmission
in the unlicensed 60 GHz industrial, scientific, and medical (ISM)
band.
APPLICATIONS
► 60 GHz short data link for industrial and medical high data rate
applications
► High speed data for rotating applications, such as slip rings and
magnetic resonance imaging systems
For more information about the ADMV9623, contact Analog Devices, Inc., at VBand@analog.com
Rev. SpA
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
DOCUMENT FEEDBACK
TECHNICAL SUPPORT
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.