Data Sheet
ADMV9613
60 GHz Millimeterwave Short Data Link
FEATURES
GENERAL DESCRIPTION
► Meets V-band worldwide frequency requirements
► Integrated omnidirectional circularly polarized antenna
► 12 dBi gain and ±20° half power beamwidth typical
► 14 dBm equivalent isotropic radiated power typical
► RoHS compliant
► Integrated high band and low band diplexer for improved multi-
path distortion
► Full duplex operation
The ADMV9613 is a complete millimeterwave (mmWave) wireless
connectivity solution in a small printed circuit assembly (PCA)
format. All millimeterwave signals are confined to the printed cir-
cuit assembly, simplifying implementation. Wireless transmission
is achieved using the integrated circularly polarized (CP) omnidirec-
tional patch antenna array, which enables communication in many
applications, including rotation. Following the antenna array is an
integrated diplexer that provides isolation between the separate
transmit and receive paths on the board, which reduces multipath
distortion. The receive path integrates all components to demodu-
late the 59.85 GHz frequency to baseband signals. The flexible
receiver gain control is programmable over a wide range to easily
accommodate the required link budget. The receiver baseband
outputs are dc-coupled and can provide over 500 mV of differential
output signal level. Likewise, the transmit path integrates all compo-
nents to modulate input baseband signals to 63.2625 GHz. The
transmitter has programmable gain control to maintain level trans-
mit power. The transmit baseband inputs are dc-coupled and have
a broad common-mode input range. Synthesizers are integrated to
maintain excellent frequency stability vs. temperature. The simple
amplitude modulation (AM) scheme eliminates the need for external
data converters, allowing for bit rates of greater than 100 Mbps.
On-board power management is integrated to a single 5 V voltage
rail to power the ADMV9613.
► Simple AM scheme
► Data rate: 100 Mbps
► Ultralow latency
► Short link communication distance: 1 cm to 5 cm
► Receiver frequency: 59.85 GHz
► Transmitter frequency: 63.2625 GHz
► Transmitter gain setting range: −3 dB to +32 dB
► Integrated transmitter PA power detector
► Receiver gain setting range: −10 dB to +69 dB
► RF, IF, and BB gain control
► Integrated receiver and transmitter frequency synthesizers
► Integrated reference clock
► On-chip temperature sensors
► DC-coupled baseband input and output
► 3-wire digital SPI
► 34.70 mm × 29.89 mm, 52-terminal printed circuit assembly
(PCA)
Together with the ADMV9623, the ADMV9613 provides a complete,
full duplexed 60 GHz data link for high speed data transmission
in the unlicensed 60 GHz industrial, scientific, and medical (ISM)
band.
APPLICATIONS
► 60 GHz short data link for industrial and medical high data rate
applications
► High speed data for rotating applications, such as slip rings and
magnetic resonance imaging systems
For more information on the ADMV9613, contact Analog Devices, Inc., at VBand@analog.com
Rev. SpA
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
DOCUMENT FEEDBACK
TECHNICAL SUPPORT
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
5秒后页面跳转
数据手册解读：MB10S引脚说明、电气参数
2N7002K资料解读：产品特性和型号推荐
资料解读：TL494CN参数和引脚功能图说明
解读BAT54A数据手册：全面解析产品特性与应用
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
