± ±15 k5ꢀES5ꢁProteotꢂd5ꢃ3ꢃ5kd5RE-2ꢃ2
Lint5SPivtP/RtetivtP
ASMꢃ2ꢃ2ꢀ
55
FEATURES
FUNCTIONAL BLOCK DIAGRAM
+3.3V INPUT
Data rate: 460 kbps
ADM3232E
+3.3V TO +6.6V
VOLTAGE
2 Tx and 2 Rx
C1
0.1µF
10V
+
C5
0.1µF
C1+
C1–
V
CC
+
+
Meets EIA-232E specifications
0.1 μF charge pump capacitors
ESD protection to IEC 1000-4-2 (801.2) on RS-232 I/Os
Contact discharge: 8 kV
C3
0.1µF
6.3V
+
V+
DOUBLER
+6.6V TO –6.6V
VOLTAGE
INVERTER
C2
0.1µF
10V
C2+
C2–
V–
C4
+
0.1µF
10V
Air gap discharge: 1ꢀ kV
T1
T1
T1
IN
OUT
TTL/CMOS
INPUTS
RS-232
OUTPUTS
APPLICATIONS
T2
T2
R1
T2
IN
OUT
General-purpose RS-232 data link
Portable instruments
Handsets
R1
R2
R1
OUT
IN
IN
TTL/CMOS
OUTPUTS
5kΩ
5kΩ
RS-232
INPUTS*
R2
R2
OUT
Industrial/telecom diagnostic ports
GND
*INTERNAL 5kΩ PULL-DOWN RESISTOR
ON EACH RS-232 INPUT.
Figure 1.
GENERAL DESCRIPTION
Emissions are also controlled to within very strict limits. CMOS
technology is used to keep the power dissipation to an absolute
minimum, allowing maximum battery life in portable applications.
The ADM3232E transceiver is a high speed, 2-channel RS-232/V.28
interface device that operates from a single 3.3 V power supply.
Low power consumption makes it ideal for battery-powered
portable instruments. The ADM3232E conforms to the EIA-232E
and ITU-T V.28 specifications and operates at data rates up to
460 kbps.
Four external 0.± μF charge pump capacitors are used for the
voltage doubler/inverter, permitting operation from a single
3.3 V supply.
All RS-232 (TxOUT and RxIN) inputs and outputs are protected
against electrostatic discharges (up to ±±1 kV ESD protection).
This ensures compliance with IEC ±000-4-2 requirements.
The ADM3232E is available in a ±6-lead narrow and wide SOIC
packages, as well as a space-saving ±6-lead TSSOP.
This device is ideally suited for operation in electrically harsh
environments or where RS-232 cables are frequently plugged/
unplugged, with the ±±1 kV ESD protection of the ADM3232E
RS-232 input/output pins.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2006–2011 Analog Devices, Inc. All rights reserved.