High Speed, ESD-Protected, Full-Duplex,
iCoupler Isolated RS-485 Transceiver
ADM2490E
FEATURES
FUNCTIONAL BLOCK DIAGRAM
V
V
DD2
DD1
Isolated, full-duplex RS-485/RS-422 transceiver
8 kV ESD protection on RS-485 input/output pins
16 Mbps data rate
ADM2490E
Complies with ANSI TIA/EIA-485-A-1998 and
ISO 8482: 1987(E)
Y
Z
TxD
RxD
Suitable for 5 V or 3 V operation (VDD1
)
High common-mode transient immunity: >25 kV/μs
Receiver has open-circuit, fail-safe design
32 nodes on the bus
A
B
Thermal shutdown protection
Safety and regulatory approvals
UL recognition: 5000 V rms isolation voltage
for 1 minute per UL 1577
VDE certificate of conformity
GND
GND
2
1
Figure 1.
DIN EN 60747-5-2 (VDE 0884-10 Part 2): 2003-01
DIN EN 60950 (VDE 0805): 2001-12; EN 60950: 2000
V
IORM = 848 V peak
Operating temperature range: −40°C to +105°C
Wide body, 16-lead SOIC package
APPLICATIONS
Isolated RS-485/RS-422 interfaces
Industrial field networks
INTERBUS
Multipoint data transmission systems
GENERAL DESCRIPTION
The ADM2490E is an isolated data transceiver with ±± ꢀk EꢁD
protection that is suitable for high speed, full-duplex communi-
cation on multipoint transmission lines. It is designed for balanced
transmission lines and complies with ANꢁI TIA/EIA-4±5-A-199±
and IꢁO ±4±2: 19±7(E). The device employs Analog Devices, Inc.,
iCoupler® technology to combine a 2-channel isolator, a three-
state differential line driver, and a differential input receiver into
a single pacꢀage.
using the human body model (HBM). The logic side of the device
can be powered with either a 5 k or a 3 k supply, whereas the
bus side requires an isolated 5 k supply.
The device has current-limiting and thermal shutdown features
to protect against output short circuits and situations where bus
contention could cause excessive power dissipation.
The ADM2490E is available in a wide body, 16-lead ꢁOIC pacꢀage
and operates over the −40°C to +105°C temperature range.
The differential transmitter outputs and receiver inputs feature
electrostatic discharge circuitry that provides protection to ±± ꢀk
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2006–2008 Analog Devices, Inc. All rights reserved.