5秒后页面跳转
ADL5902 PDF预览

ADL5902

更新时间: 2024-01-23 12:17:00
品牌 Logo 应用领域
亚德诺 - ADI /
页数 文件大小 规格书
28页 2359K
描述
50 MHz to 9 GHz 65 dB TruPwr Detector

ADL5902 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFN
包装说明:HVQCCN, LCC16,.16SQ,25针数:16
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.58
模拟集成电路 - 其他类型:ANALOG CIRCUITJESD-30 代码:S-PQCC-N16
JESD-609代码:e3长度:4 mm
功能数量:1端子数量:16
最高工作温度:125 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:HVQCCN
封装等效代码:LCC16,.16SQ,25封装形状:SQUARE
封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度(摄氏度):260
电源:5 V认证状态:Not Qualified
座面最大高度:1 mm子类别:Other Analog ICs
最大供电电压 (Vsup):5.5 V最小供电电压 (Vsup):4.5 V
标称供电电压 (Vsup):5 V表面贴装:YES
温度等级:AUTOMOTIVE端子面层:MATTE TIN
端子形式:NO LEAD端子节距:0.65 mm
端子位置:QUAD处于峰值回流温度下的最长时间:40
宽度:4 mmBase Number Matches:1

ADL5902 数据手册

 浏览型号ADL5902的Datasheet PDF文件第2页浏览型号ADL5902的Datasheet PDF文件第3页浏览型号ADL5902的Datasheet PDF文件第4页浏览型号ADL5902的Datasheet PDF文件第5页浏览型号ADL5902的Datasheet PDF文件第6页浏览型号ADL5902的Datasheet PDF文件第7页 
50 MHz to 9 GHz  
65 dB TruPwr Detector  
ADL5902  
FUNCTIONAL BLOCK DIAGRAM  
FEATURES  
VPOS  
3
POS  
10  
Accurate rms-to-dc conversion from 50 MHz to 9 GHz  
Single-ended input dynamic range of 65 dB  
No balun or external input matching required  
Waveform and modulation independent, such as  
GSM/CDMA/W-CDMA/TD-SCDMA/WiMAX/LTE  
Linear-in-decibels output, scaled 53 mV/dB  
Transfer function ripple: < 0.1 dB  
TEMPERATURE  
SENSOR  
8
7
TEMP  
VSET  
ADL5902  
14  
15  
INHI  
I
DET  
2
X
INLO  
LINEAR-IN-dB VGA  
(NEGATIVE SLOPE)  
2
X
Temperature stability: < 0.3 dB  
I
TGT  
All functions temperature and supply stable  
Operates from 4.5 V to 5.5 V from −40°C to +125°C  
Power-down capability to 1.5 mW  
2
NC  
6
5
G = 5  
VOUT  
CLPF  
16  
13  
NC  
NC  
VREF  
2.3V  
BIAS AND POWER-  
DOWN CONTROL  
Pin-compatible with the 50 dB dynamic range AD8363  
APPLICATIONS  
26pF  
11  
12  
VTGT  
1
9
4
Power amplifier linearization/control loops  
Transmitter power controls  
Transmitter signal strength indication (TSSI)  
RF instrumentation  
TADJ/PWDN  
VREF  
COMM COMM  
Figure 1.  
GENERAL DESCRIPTION  
The ADL5902 is a true rms responding power detector that has  
a 65 dB measurement range when driven with a single-ended  
50 Ω source. This feature makes the ADL5902 frequency  
versatile by eliminating the need for a balun or any other form  
of external input tuning for operation up to 9 GHz.  
logarithm of the rms value of the input. In other words, the  
reading is presented directly in decibels and is scaled 1.06 V per  
decade, or 53 mV/dB; other slopes are easily arranged. In  
controller mode, the voltage applied to VSET determines the  
power level required at the input to null the deviation from the  
set point. The output buffer can provide high load currents.  
The ADL5902 provides a solution in a variety of high frequency  
systems requiring an accurate measurement of signal power.  
Requiring only a single supply of 5 V and a few capacitors, it is  
easy to use and capable of being driven single-ended or with a  
balun for differential input drive. The ADL5902 can operate  
from 50 MHz to 9 GHz and can accept inputs from −62 dBm to  
at least +3 dBm with large crest factors, such as GSM, CDMA,  
W-CDMA, TD-SCDMA, WiMAX, and LTE modulated signals.  
The ADL5902 has 1.5 mW power consumption when powered  
down by a logic high applied to the PWDN pin. It powers up  
within approximately 5 μs to its nominal operating current of  
73 mA at 25°C. The ADL5902 is supplied in a 4 mm × 4 mm,  
16-lead LFCSP for operation over the wide temperature range  
of −40°C to +125°C.  
The ADL5902 is also pin-compatible with the AD8363, 50 dB  
dynamic range TruPwr™ detector. This feature allows the  
designer to create one circuit layout for projects requiring  
different dynamic ranges. A fully populated RoHS-compliant  
evaluation board is available.  
The ADL5902 can determine the true power of a high  
frequency signal having a complex low frequency modulation  
envelope or can be used as a simple low frequency rms  
voltmeter. Used as a power measurement device, VOUT is  
connected to VSET. The output is then proportional to the  
Rev. 0  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2010 Analog Devices, Inc. All rights reserved.  
 
 
 
 

与ADL5902相关器件

型号 品牌 描述 获取价格 数据表
ADL5902ACPZ-R2 ADI 50 MHz to 9 GHz 65 dB TruPwr Detector

获取价格

ADL5902ACPZ-R7 ADI 50 MHz to 9 GHz 65 dB TruPwr Detector

获取价格

ADL5902ACPZ-WP ADI 50 MHz to 9 GHz 65 dB TruPwr Detector

获取价格

ADL5902-EVALZ ADI 50 MHz to 9 GHz 65 dB TruPwr Detector

获取价格

ADL5903 ADI 200 MHz to 6 GHz 35 dB TruPwr™ Detector

获取价格

ADL5903ACPZN-R2 ADI SPECIALTY ANALOG CIRCUIT

获取价格