Programmable Low Power Gyroscope
ADIS16250
FUNCTIONAL BLOCK DIAGRAM
FEATURES
AUX AUX
Yaw rate gyro with digital range scaling
80ꢀ°sec, 160ꢀ°sec, and 320ꢀ°sec settings
14-bit digital gyroscope sensor outputs
12-bit digital temperature sensor output
Calibrated sensitivity and bias
ADC
VREF
DAC
ADIS16250
TEMPERATURE
SENSOR
GYROSCOPE
SENSOR
CS
SIGNAL
CALIBRATION
AND
RATE
FILT
CONDITIONING
AND
Single-command bias calibration
SCLK
DIN
DIGITAL
SPI
PORT
CONVERSION
PROCESSING
Digitally controlled sample rate
Digitally controlled frequency response
Dual alarm settings with rate°threshold limits
Embedded integration for short-term angle estimates
Digitally activated self-test
Digitally activated low power mode
Interrupt-driven wake-up
DIGITAL
CONTROL
SELF-TEST
DOUT
VCC
POWER
MANAGEMENT
AUXILIARY
ALARM
I/O
COM
RST
DIO0 DIO1
SPI®-compatible serial interface
Figure 1.
50 Hz sensor bandwidth
Auxiliary 12-bit ADC input and 12-bit DAC output
Auxiliary digital input°output
Single-supply operation: 4.75 V to 5.25 V
2000 g powered shock survivability
APPLICATIONS
Instrumentation control
Platform control and stabilization
Motion control and analysis
Avionics instrumentation
Navigation
Image stabilization
Robotics
GENERAL DESCRIPTION
through several built-in features, including a single-command
auto-zero recalibration function, as well as configurable sample
rate and frequency response. Additional features can be used to
further reduce system complexity, including:
The ADIS16250 is a complete, angular rate measurement
system available in a single compact package enabled by Analog
Devices, Inc., iSensor™ integration. By enhancing Analog
Devices iMEMS® sensor technology with an embedded signal
processing solution, the ADIS16250 provides factory calibrated
and tunable digital sensor data in a convenient format that can
be accessed using a simple SPI serial interface. The SPI interface
provides access to measurements for the gyroscope, temperature,
power supply, and one auxiliary analog input. Easy access to
calibrated digital sensor data provides developers with a system-
ready device, reducing development time, cost, and program risk.
•
•
•
•
Configurable alarm function
Auxiliary 12-bit ADC and DAC
Two configurable digital I°O ports
Digital self-test function
System power dissipation can be optimized via the ADIS16250
power management features, including an interrupt-driven wake-up.
The device range can be digitally selected from three different
settings: ±±0ꢀ°sec, ±160ꢀ°sec, and ±ꢁ20ꢀ°sec. Unique
characteristics of the end system are accommodated easily
The ADIS16250 is available in an 11 mm × 11 mm × 5.5 mm,
laminate-based land grid array (LGA) package with a
temperature range of −40ꢀC to +±5ꢀC.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.