± ±330°/Se
PrSeision Angular RatS /Snsor
ADI/161±5
FEATURES
GENERAL DESCRIPTION
Digital gyroscope system, 300°/sec measurement range
In-run bias stability, ~6°/hour
The ADIS16135 iSensor® is a high performance, digital gyro-
scope sensing system that operates autonomously and requires
no user configuration to produce accurate rate sensing data. It
provides performance advantages with low noise density, wide
bandwidth, and excellent in-run bias stability, which are
enabling for applications such as platform control, navigation,
robotics, and medical instrumentation.
~11°/hour over temperature: −40°C to +85°C
Autonomous operation and data collection
No external configuration commands required
Start-up time: 181 ms; sleep mode recovery: 5 ms
Factory-calibrated sensitivity and bias
Calibration temperature range: −40°C to +85°C
Single serial peripheral interface, SPI compatible
Wide bandwidth: 335 Hz
This sensor system combines industry-leading iMEMS® tech-
nology with signal conditioning that optimizes dynamic
performance. The factory calibration characterizes the entire
sensor signal chain for sensitivity and bias over a temperature
range of −40°C to +85°C. As a result, each ADIS16135 has its
own unique correction formulas to produce accurate measure-
ments upon installation. For some systems, the factory calibration
eliminates the need for system-level calibration and greatly
simplifies it for others.
Embedded temperature sensor
Programmable operation and control
Automatic and manual bias correction controls
Digital filters: Bartlett FIR, average/decimation
Internal sample rate: up to 2048 SPS
Digital I/O: data ready, alarm indicator, general-purpose
Alarms for condition monitoring
Sleep mode for power management
The ADIS16135 samples data at rates of up to 2048 SPS and
offers an averaging/decimation filter structure for optimizing
noise/bandwidth trade-offs. The serial peripheral interface (SPI)
and user register structure provide easy access to configuration
controls and calibrated sensor data for embedded processor
platforms.
Enable external sample clock input: up to 2048 Hz
Single-supply operation: 4.85 V to 5.15 V
2000 g shock survivability
Operating temperature range: −40°C to +105°C
APPLICATIONS
The 36 mm × 44 mm × 14 mm package provides four holes for
simple mechanical attachment, using M2 (or 2-56 standard size)
machine screws along with a standard 24-pin, dual-row, 1 mm
pitch connector that supports electrical attachment to a printed
circuit board or cable system. The ADIS16135 provides an
operating temperature range of −40°C to +105°C.
Precision instrumentation
Platform stabilization and control
Industrial vehicle navigation
Downhole instrumentation
Robotics
FUNCTIONAL BLOCK DIAGRAM
DIO1 DIO2 CLKIN RST
VCC
POWER
MANAGEMENT
SELF-TEST
I/O
ALARMS
GND
MEMS
SENSOR
USER
CONTROLLER
CONTROL
REGISTERS
CS
TEMP
SENSOR
SCLK
DIN
SPI
PORT
CLOCK CALIBRATION
FILTER
OUTPUT
DATA
REGISTERS
DOUT
ADIS16135
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2010 Analog Devices, Inc. All rights reserved.