CMOS 3 V/5 V, Wide Bandwidth Quad 2:1
Mux in Chip Scale Package
a
ADG784
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Low Insertion Loss and On Resistance: 4 ꢀ Typical
On-Resistance Flatness <2 ꢀ
Bandwidth >200 MHz
Single 3 V/5 V Supply Operation
Rail-to-Rail Operation
ADG784
S1A
D1
D2
D3
D4
S1B
S2A
Very Low Distortion: <1%
Low Quiescent Supply Current (100 nA Typical)
Fast Switching Times
tON 10 ns
S2B
S3A
S3B
S4A
t
OFF 4 ns
TTL/CMOS Compatible
For Functionally Equivalent Devices in 16-Lead QSOP/
SOIC Packages, See ADG774
S4B
1-OF-2
DECODER
APPLICATIONS
100VG-AnyLAN
Token Ring 4 Mbps/16 Mbps
ATM25/155
IN
EN
NIC Adapter and Hubs
Audio and Video Switching
Relay Replacement
These switches conduct equally well in both directions when
ON, and have an input signal range that extends to the sup-
plies. In the OFF condition, signal levels up to the supplies
are blocked. The ADG784 switches exhibit break-before-
make switching action.
GENERAL DESCRIPTION
The ADG784 is a monolithic CMOS device comprising four
2:1 multiplexer/demultiplexers with high impedance outputs.
The CMOS process provides low power dissipation yet gives
high switching speed and low on resistance. The on-resistance
variation is typically less than 0.5 Ω with an input signal ranging
from 0 V to 5 V.
PRODUCT HIGHLIGHTS
1. Also Available as ADG774 in 16-Lead QSOP and SOIC.
The bandwidth of the ADG784 is greater than 200 MHz and
this, coupled with low distortion (typically 0.5%), makes the
part suitable for switching fast ethernet signals.
2. Wide Bandwidth Data Rates >200 MHz.
3. Ultralow Power Dissipation.
The on-resistance profile is very flat over the full analog input
range ensuring excellent linearity and low distortion when switch-
ing audio signals. Fast switching speed, coupled with high signal
bandwidth, also makes the parts suitable for video signal switch-
ing. CMOS construction ensures ultralow power dissipation
making the parts ideally suited for portable and battery powered
instruments.
4. Extended Signal Range.
The ADG784 is fabricated on a CMOS process giving an
increased signal range that fully extends to the supply rails.
5. Low Leakage over Temperature.
6. Break-Before-Make Switching.
This prevents channel shorting when the switches are config-
ured as a multiplexer.
The ADG784 operates from a single 3.3 V/5 V supply and is
TTL logic compatible. The control logic for each switch is shown
in the Truth Table.
7. Crosstalk is typically –70 dB @ 30 MHz.
8. Off isolation is typically –60 dB @ 10 MHz.
9. Available in Chip Scale Package (CSP).
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2001