CMOS, 2.5 ⍀ Low-Voltage,
8-/16-Channel Multiplexers
a
ADG706/ADG707
FEATURES
1.8 V to 5.5 V Single Supply
؎3 V Dual Supply
FUNCTIONAL BLOCK DIAGRAMS
ADG706
ADG707
2.5 ⍀ On Resistance
0.5 ⍀ On-Resistance Flatness
100 pA Leakage Currents
40 ns Switching Times
Single 16-to-1 Multiplexer ADG706
Differential 8-to-1 Multiplexer ADG707
28-Lead TSSOP Package
Low-Power Consumption
TTL/CMOS-Compatible Inputs
S1
S1A
S8A
DA
DB
D
S1B
S8B
S16
1-OF-16
DECODER
1-OF-8
DECODER
APPLICATIONS
Data Acquisition Systems
Communication Systems
Relay Replacement
A1
A0
A2 A3 EN
A2
A1 EN
A0
Audio and Video Switching
Battery-Powered Systems
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADG706 and ADG707 are low-voltage, CMOS analog
multiplexers comprising 16 single channels and eight differential
channels respectively. The ADG706 switches one of 16 inputs
(S1–S16) to a common output, D, as determined by the 4-bit
binary address lines A0, A1, A2, and A3. The ADG707 switches
one of eight differential inputs to a common differential output as
determined by the 3-bit binary address lines A0, A1, and A2.
An EN input on both devices is used to enable or disable the
device. When disabled, all channels are switched OFF.
1. Single/Dual Supply Operation. The ADG706 and ADG707
are fully specified and guaranteed with 3 V and 5 V single
supply and 3 V dual supply rails.
2. Low On Resistance (2.5 Ω typical).
3. Low-Power Consumption (<0.01 µW).
4. Guaranteed Break-Before-Make Switching Action.
5. Small 28-Lead TSSOP Package.
Low-power consumption and operating supply range of 1.8 V to
5.5 V make the ADG706 and ADG707 ideal for battery-powered,
portable instruments. All channels exhibit break-before-make
switching action preventing momentary shorting when switch-
ing channels. These devices are also designed to operate from a
dual supply of 3 V.
These multiplexers are designed on an enhanced submicron
process that provides low-power dissipation yet gives high-
switching speed, very low on resistance and leakage currents.
On resistance is in the region of a few ohms and is closely
matched between switches and very flat over the full signal
range. These parts can operate equally well as either multiplexers
or demultiplexers and have an input signal range which extends
to the supplies.
The ADG706 and ADG707 are available in small 28-lead TSSOP
packages.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
World Wide Web Site: http://www.analog.com
© Analog Devices, Inc., 2000