+3 V/+5 V/±5 V CMOS 4-/8-Channel
Analog Multiplexers
±2V to ±6V Dual Supply
ADG658
ADG659
2V to 12V Single Supply
AutomotiveTemperature Range –40oC to +125
oC
<0.1 nA Leakage Currents
S1
S1A
S4A
DA
DB
45
On Resistance over Full Signal Range
Rail-to-Rail Switching Operation
Single 8-to-1 Multiplexer ADG658
Differential 4-to-1 Multiplexer ADG659
16-Lead LFCSP/TSSOP Packages
Typical Power Consumption <0.1 W
TTL/CMOS Compatible Inputs
D
S1B
S4B
S8
1 OF 8
DECODER
1 OF 4
DECODER
Package Upgrades to 74HC4051/74HC4052 and
MAX4051/MAX4052/MAX4581/MAX4582
A0 A1 A2 EN
A0
A1
EN
Automotive Applications
AutomaticTest Equipment
Data Acquisition Systems
Battery-Powered Systems
Communication Systems
Audio andVideo Signal Routing
Relay Replacement
SWITCHES SHOWN FOR A LOGIC 1 INPUT
Sample-and-Hold Systems
Industrial Control Systems
The ADG658 and ADG659 are low voltage, CMOS analog
multiplexers comprised of eight single channels and four dif-
ferential channels, respectively. The ADG658 switches one of
eight inputs (S1–S8) to a common output, D, as determined by
the 3-bit binary address lines A0, A1, and A2. The ADG659
switches one of four differential inputs to a common differential
output, as determined by the 2-bit binary address lines A0 and
A1. An
EN
input on both devices is used to enable or disable
the device. When disabled, all channels are switched off.
1. Single- and dual-supply operation. The ADG658 and
ADG659 offer high performance and are fully specified
and guaranteed with ±5 V, +5 V, and +3 V supply rails.
2. Automotive temperature range –40oC to +125
oC.
3. Low power consumption, typically <0.1
W.
4. 1
6
-lead
4 mm
4 mm LFCSP packages and 16-lead
TSSOP package.
These parts are designed on an enhanced process that provides
lower power dissipation yet gives high switching speeds. These
parts can operate equally well as either multiplexers or demulti-
plexers and have an input range that extends to the supplies. All
channels exhibit break-before-make switching action, prevent-
ing momentary shorting when switching channels. All digital
inputs have 0.8 V to 2.4 V logic thresholds, ensuring TTL/
CMOS logic compatibility when using single +5 V or dual
±5 V supplies.
The ADG658 and ADG659 are available in 16-lead TSSOP
packages and 16-lead 4 mm
4 mm LFCSP packages.
REV.0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed byAnalog Devices for its
use, nor for any infringements of patents or other rights of third parties
that may result from its use. No license is granted by implication or oth-
erwise under any patent or patent rights of Analog Devices.Trademarks
andregisteredtrademarksarethepropertyoftheirrespectivecompanies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© 2003 Analog Devices, Inc. All rights reserved.