High Voltage Latch-Up Proof,
Quad SPST Switches
ADG5412/ADG5413
FUNCTIONAL BLOCK DIAGRAMS
FEATURES
Latch-up proof
S1
S1
8 kV human body model (HBM) ESD rating
Low on resistance (<10 Ω)
9 V to 22 V dual-supply operation
9 V to 40 V single-supply operation
48 V supply maximum ratings
IN1
IN2
IN3
IN4
IN1
IN2
IN3
IN4
D1
S2
D1
S2
D2
S3
D2
S3
ADG5412
ADG5413
Fully specified at 1ꢀ V, 20 V, +12 V, and +36 V
VSS to VDD analog signal range
D3
S4
D3
S4
APPLICATIONS
Relay replacement
Automatic test equipment
Data acquisition
D4
D4
Instrumentation
SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Avionics
Figure 1.
Audio and video switching
Communication systems
exhibits break-before-make switching action for use in
multiplexer applications.
GENERAL DESCRIPTION
The ADG5412/ADG5413 contain four independent single-
pole/single-throw (SPST) switches. The ADG5412 switches
turn on with Logic 1. The ADG5413 has two switches with
digital control logic similar to that of the ADG5412; however,
the logic is inverted on the other two switches. Each switch
conducts equally well in both directions when on, and each
switch has an input signal range that extends to the supplies.
In the off condition, signal levels up to the supplies are blocked.
PRODUCT HIGHLIGHTS
1. Trench isolation guards against latch-up. A dielectric trench
separates the P and N channel transistors thereby preventing
latch-up even under severe overvoltage conditions.
2. Low RON
.
3. Dual-supply operation. For applications where the analog
signal is bipolar, the ADG5412/ADG5413 can be operated
from dual supplies up to 22 V.
4. Single-supply operation. For applications where the analog
signal is unipolar, the ADG5412/ADG5413 can be operated
from a single rail power supply up to 40 V.
The ADG5412 and ADG5413 do not have a VL pin. The digital
inputs are compatible with 3 V logic inputs over the full
operating supply range.
The on-resistance profile is very flat over the full analog input
range, which ensures good linearity and low distortion when
switching audio signals. High switching speed also makes the
devices suitable for video signal switching. The ADG5413
5. 3 V logic compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V.
6. No VL logic power supply required.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2010 Analog Devices, Inc. All rights reserved.