High Voltage Latch-Up Proof,
4-/8-Channel Multiplexers
Enhanced Product
ADG5408-EP/ADG5409-EP
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
Latch-up proof
ADG5408-EP
ADG5409-EP
8 kV human body model (HBM) ESD rating
Low on resistance (13.5 Ω)
9 V to 22 V dual-supply operation
9 V to 40 V single-supply operation
Fully specified at 15 V, 20 V, +12 V, and +36 V
S1
S1A
S4A
DA
DB
D
S1B
S4B
VSS to VDD analog signal range
S8
ENHANCED PRODUCT FEATURES
Supports defense and aerospace applications
(AQEC standard)
1-OF-8
DECODER
1-OF-4
DECODER
Military temperature range: –55°C to +125°C
Controlled manufacturing baseline
One assembly/test site
A0 A1 A2 EN
A0 A1 EN
Figure 1.
One fabrication site
Enhanced product change notification
Qualification data available on request
APPLICATIONS
Relay replacement
Automatic test equipment
Data acquisition
Instrumentation
Avionics
Communication systems
GENERAL DESCRIPTION
The ADG5408-EP/ADG5409-EP are monolithic CMOS analog
multiplexers comprising eight single channels and four differential
channels, respectively. The ADG5408-EP switches one of eight
inputs to a common output, as determined by the 3-bit binary
address lines, A0, A1, and A2. The ADG5409-EP switches one
of four differential inputs to a common differential output, as
determined by the 2-bit binary address lines, A0 and A1.
The ADG5408-EP/ADG5409-EP do not have VL pins; rather, the
logic power supply is generated internally by an on-chip voltage
generator.
Additional application and technical information can be found
in the ADG5408/ADG5409 data sheet.
PRODUCT HIGHLIGHTS
1. Trench isolation guards against latch-up. A dielectric trench
separates the P and N channel transistors thereby preventing
latch-up even under severe overvoltage conditions.
An EN input on both devices enables or disables the device.
When EN is disabled, all channels switch off. The on-resistance
profile is very flat over the full analog input range, which ensures
good linearity and low distortion when switching audio signals.
High switching speed also makes the parts suitable for video
signal switching.
2. Low RON
.
3. Dual-supply operation. For applications where the analog
signal is bipolar, the ADG5408-EP/ADG5409-EP can be
operated from dual supplies up to 22 V.
4. Single-supply operation. For applications where the analog
signal is unipolar, the ADG5408-EP/ADG5409-EP can be
operated from a single rail power supply up to 40 V.
5. 3 V logic compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V.
6. No VL logic power supply required.
Each switch conducts equally well in both directions when on,
and each switch has an input signal range that extends to the
power supplies. In the off condition, signal levels up to the
supplies are blocked.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2015 Analog Devices, Inc. All rights reserved.
www.analog.com