4/8 Channel Fault-Protected
Analog Multiplexers
a
ADG508F/ADG509F/ADG528F*
FUNCTIONAL BLOCK DIAGRAMS
FEATURES
Low On Resistance (300 ⍀ typ)
Fast Switching Times
ADG508F/ADG528F
ADG509F
tON 250 ns max
tOFF 250 ns max
S1
S1A
S4A
DA
DB
Low Power Dissipation (3.3 mW max)
Fault and Overvoltage Protection (–40 V to +55 V)
All Switches OFF with Power Supply OFF
Analog Output of ON Channel Clamped Within Power
Supplies If an Overvoltage Occurs
Latch-Up Proof Construction
Break Before Make Construction
TTL and CMOS Compatible Inputs
D
S1B
S4B
S8
WR
RS
ADG528F
ONLY
1 OF 8
DECODER
1 OF 4
DECODER
APPLICATIONS
Existing Multiplexer Applications (Both Fault-Protected
and Nonfault-Protected)
A0 A1 A2 EN
A1
A0
EN
New Designs Requiring Multiplexer Functions
2. ON channel turns off while fault exists.
3. Low RON.
GENERAL DESCRIPTION
The ADG508F, ADG509F and ADG528F are CMOS analog
multiplexers, the ADG508F and ADG528F comprising eight
single channels and the ADG509F comprising four differential
channels. These multiplexers provide fault protection. Using a
series n-channel, p-channel, n-channel MOSFET structure,
both device and signal source protection is provided in the event
of an overvoltage or power loss. The multiplexer can withstand
continuous overvoltage inputs from –40 V to +55 V. During
fault conditions, the multiplexer input (or output) appears as an
open circuit and only a few nanoamperes of leakage current will
flow. This protects not only the multiplexer and the circuitry
driven by the multiplexer, but also protects the sensors or signal
sources that drive the multiplexer.
4. Fast Switching Times.
5. Break-Before-Make Switching.
Switches are guaranteed break-before-make so that input
signals are protected against momentary shorting.
6. Trench Isolation Eliminates Latch-up.
A dielectric trench separates the p and n-channel MOSFETs
thereby preventing latch-up.
ORDERING GUIDE
Model1
Temperature Range
Package Option2
The ADG508F and ADG528F switch one of eight inputs to a
common output as determined by the 3-bit binary address lines
A0, A1 and A2. The ADG509F switches one of four differential
inputs to a common differential output as determined by the 2-
bit binary address lines A0 and A1. The ADG528F has on-chip
address and control latches that facilitate microprocessor inter-
facing. An EN input on each device is used to enable or disable
the device. When disabled, all channels are switched OFF.
ADG508FBN
ADG508FBRN
ADG508FBRW
ADG508FTQ
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–55°C to +125°C
N-16
R-16N
R-16W
Q-16
ADG509FBN
ADG509FBRN
ADG509FBRW
ADG509FTQ
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–55°C to +125°C
N-16
R-16N
R-16W
Q-16
PRODUCT HIGHLIGHTS
1. Fault Protection.
ADG528FBN
ADG528FBP
ADG528FTQ
–40°C to +85°C
–40°C to +85°C
–55°C to +125°C
N-18
P-20A
Q-18
The ADG508F/ADG509F/ADG528F can withstand con-
tinuous voltage inputs from –40 V to +55 V. When a fault
occurs due to the power supplies being turned off, all the
channels are turned off and only a leakage current of a few
nanoamperes flows.
NOTES
1To order MIL-STD-883, Class B processed parts, add /883B to T grade part
numbers.
2N = Plastic DIP; P = Plastic Leaded Chip Carrier (PLCC); Q = Cerdip;
RN = 0.15" Small Outline IC (SOIC), RW = 0.3" Small Outline IC (SOIC).
*Patent Pending.
REV. C
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
World Wide Web Site: http://www.analog.com
© Analog Devices, Inc., 1998
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
