High Voltage, Latch-Up Proof,
4-/8-Channel Multiplexers
Data Sheet
ADG5208/ADG5209
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
Latch-up proof
ADG5208
ADG5209
5.5 pF off source capacitance
52 pF off drain capacitance
0.4 pC charge injection
Low on resistance: 160 Ω typical
9 V to 22 V dual-supply operation
9 V to 40 V single-supply operation
48 V supply maximum ratings
Fully specified at 15 V, 20 V, +12 V, and +36 V
S1
S1A
DA
DB
S4A
S1B
D
S4B
S8
1-OF-8
DECODER
1-OF-4
DECODER
V
SS to VDD analog signal range
Human body model (HBM) ESD rating
4 kV I/O port to supplies
1 kV I/O port to I/O port
4 kV all other pins
A0 A1 A2 EN
A0 A1 EN
Figure 1.
APPLICATIONS
Automatic test equipment
Data acquisition
Instrumentation
Avionics
Audio and video switching
Communication systems
The ADG5208/ADG5209 do not have VL pins; instead, the logic
power supply is generated internally by an on-chip voltage
generator.
GENERAL DESCRIPTION
The ADG5208/ADG5209 are monolithic CMOS analog multi-
plexers comprising eight single channels and four differential
channels, respectively. The ADG5208 switches one of eight
inputs to a common output, as determined by the 3-bit binary
address lines, A0, A1, and A2. The ADG5209 switches one of
four differential inputs to a common differential output, as
determined by the 2-bit binary address lines, A0 and A1.
PRODUCT HIGHLIGHTS
1. Trench Isolation Guards Against Latch-Up.
A dielectric trench separates the P and N channel transistors
to prevent latch-up even under severe overvoltage conditions.
2. 0.4 pC Charge Injection.
An EN input on both devices enables or disables the device.
When EN is disabled, all channels switch off. The ultralow
capacitance and charge injection of these switches make them
ideal solutions for data acquisition and sample-and-hold appli-
cations, where low glitch and fast settling are required. Fast
switching speed coupled with high signal bandwidth make
these devices suitable for video signal switching.
3. Dual-Supply Operation.
For applications where the analog signal is bipolar, the
ADG5208/ADG5209 can be operated from dual supplies
of up to 22 V.
4. Single-Supply Operation.
For applications where the analog signal is unipolar, the
ADG5208/ADG5209 can be operated from a single rail
power supply of up to 40 V.
Each switch conducts equally well in both directions when on,
and each switch has an input signal range that extends to the
power supplies. In the off condition, signal levels up to the
supplies are blocked.
5. 3 V Logic-Compatible Digital Inputs.
V
INH = 2.0 V, VINL = 0.8 V.
6. No VL Logic Power Supply Required.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2011–2012 Analog Devices, Inc. All rights reserved.