LC2MOS
5 Ω RON SPST Switches
ADG451/ADG452/ADG453
FUNCTIONAL BLOCK DIAGRAMS
FEATURES
S1
Low on resistance (4 Ω)
On resistance flatness (0.2 Ω)
44 V supply maximum ratings
1ꢀ V analog signal range
Fully specified at ꢀ V, 12 V, 1ꢀ V
Ultralow power dissipation (18 μW)
ESD 2 kV
IN1
D1
S2
IN2
D2
S3
ADG451
IN3
D3
S4
IN4
Continuous current (100 mA)
Fast switching times
D4
SWITCHES SHOWN FOR A LOGIC 1 INPUT.
tON 70 ns
tOFF 60 ns
Figure 1. ADG451
S1
TTL-/CMOS-compatible
Pin-compatible upgrade for ADG411/ADG412/ADG413
and ADG431/ADG432/ADG433
IN1
D1
S2
IN2
D2
S3
APPLICATIONS
ADG452
IN3
Relay replacement
D3
S4
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
PBX, PABX systems
IN4
D4
SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Figure 2. ADG452
S1
IN1
D1
S2
Avionics
IN2
GENERAL DESCRIPTION
D2
S3
ADG453
IN3
The ADG451/ADG452/ADG453 are monolithic CMOS
devices comprising four independently selectable switches.
They are designed on an enhanced LC2MOS process that
provides low power dissipation yet gives high switching
speed and low on resistance.
D3
S4
IN4
D4
SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Figure 3. ADG453
The on resistance profile is very flat over the full analog input
range, ensuring excellent linearity and low distortion when
switching audio signals. Fast switching speed, coupled with high
signal bandwidth, makes the parts suitable for video signal
switching. CMOS construction ensures ultralow power dissipa-
tion, making the parts ideally suited for portable and battery-
powered instruments.
The ADG453 has two switches with digital control logic similar
to that of the ADG451, while the logic is inverted on the other
two switches.
Each switch conducts equally well in both directions when on,
and each has an input signal range that extends to the supplies.
In the off condition, signal levels up to the supplies are blocked.
The ADG451/ADG452/ADG453 contain four independent,
single-pole/single-throw (SPST) switches. The ADG451 and
ADG452 differ only in that the digital control logic is inverted. The
ADG451 switches are turned on with a logic low on the appropriate
control input, while a logic high is required for the ADG452.
The ADG453 exhibits break-before-make switching action for
use in multiplexer applications. Inherent in the design is low
charge injection for minimum transients when switching the
digital inputs.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.