Low Voltage, 1.15 V to 5.5 V, 4-Channel,
Bidirectional Logic Level Translator
Data Sheet
ADG3304
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Bidirectional level translation
Operates from 1.15 V to 5.5 V
Low quiescent current < 5 µA
No direction pin
V
V
CCY
CCA
A1
A2
A3
A4
EN
Y1
Y2
Y3
Y4
Qualified for automotive applications
APPLICATIONS
SPI®, MICROWIRE™ level translation
Low voltage ASIC level translation
Smart card readers
Cell phones and cell phone cradles
Portable communications devices
Telecommunications equipment
Network switches and routers
Storage systems (SAN/NAS)
Computing/server applications
GPS
GND
Figure 1.
Portable POS systems
Low cost serial interfaces
GENERAL DESCRIPTION
The ADG3304 is a bidirectional logic level translator that con-
tains four bidirectional channels. It can be used in multivoltage
digital system applications, such as data transfer, between a low
voltage digital signal processing controller and a higher voltage
device using SPI and MICROWIRE interfaces. The internal
architecture allows the device to perform bidirectional logic
level translation without an additional signal to set the direction
in which the translation takes place.
The enable pin (EN) provides three-state operation on both the
A side and the Y side pins. When the EN pin is pulled low, the
terminals on both sides of the device are in the high impedance
state. The EN pin is referred to the VCCA supply voltage and
driven high for normal operation.
The ADG3304 is available in compact 14-lead TSSOP, 12-ball
WLCSP, and 20-lead LFCSP. It is guaranteed to operate over
the 1.15 V to 5.5 V supply voltage range.
The voltage applied to VCCA sets the logic levels on the A side of
the device, while VCCY sets the levels on the Y side. For proper
operation, VCCA must always be less than VCCY. The VCCA-com-
patible logic signals applied to the A side of the device appear as
PRODUCT HIGHLIGHTS
1. Bidirectional level translation.
2. Fully guaranteed over the 1.15 V to 5.5 V supply range.
3. No direction pin.
V
CCY-compatible levels on the Y side. Similarly, VCCY-compatible
logic levels applied to the Y side of the device appear as VCCA
compatible logic levels on the A side.
-
4. Available in 14-lead TSSOP, 12-ball WLCSP, and 20-lead
LFCSP.
Rev. D
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2005–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com