4.5 Ω RON, 4-/8-Channel
5 ꢀ,ꢁ+1 ꢀ, ꢁ5 ꢀ, anꢂ ꢁꢃ.ꢃ ꢀ ꢄMlꢅtileꢆeꢇr
ADG+608/ADG+609
FUNCTIONAL BLOCK DIAGRAMS
FEATURES
4.5 Ω typical on resistance
ADG1608
1 Ω on-resistance flatness
S1
Up to 470 mA continuous current
3.3 V to 8 V dual-supply operation
3.3 V to 16 V single-supply operation
No VL supply required
D
S8
3 V logic-compatible inputs
Rail-to-rail operation
16-lead TSSOP and 16-lead, 3 mm × 3 mm LFCSP
1-OF-8
DECODER
A0 A1 A2 EN
APPLICATIONS
Figure 1.
Communication systems
Medical systems
Audio signal routing
Video signal routing
ADG1609
Automatic test equipment
Data acquisition systems
Battery-powered systems
Sample-and-hold systems
Relay replacements
S1A
DA
S4A
S1B
DB
S4B
1-OF-4
DECODER
A0
A1 EN
Figure 2.
GENERAL DESCRIPTION
The ADG1608/ADG1609 are monolithic CMOS analog multip-
lexers comprising eight single channels and four differential
channels, respectively. The ADG1608 switches one of eight
inputs to a common output, as determined by the 3-bit binary
address lines, A0, A1, and A2. The ADG1609 switches one of
four differential inputs to a common differential output, as
determined by the 2-bit binary address lines, A0 and A1. An
EN input on both devices is used to enable or disable the device.
When disabled, all channels are switched off.
The low on resistance of these switches make them ideal solu-
tions for data acquisition and gain switching applications where
low on resistance and distortion is critical. The on-resistance
profile is very flat over the full analog input range, ensuring
excellent linearity and low distortion when switching audio
signals.
CMOS construction ensures ultralow power dissipation,
making the parts ideally suited for portable and battery-
powered instruments.
Each switch conducts equally well in both directions when on
and has an input signal range that extends to the supplies. In the
off condition, signal levels up to the supplies are blocked. All
switches exhibit break-before-make switching action. Inherent
in the design is low charge injection for minimum transients
when switching the digital inputs.
PRODUCT HIGHLIGHTS
1. 8 Ω maximum on resistance over temperature.
2. Minimum distortion: THD + N = 0.04%
3. 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V.
4. No VL logic power supply required.
5. Ultralow power dissipation: <8 nW.
6. 16-lead TSSOP and 16-lead, 3 mm × 3 mm LFCSP.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2009 Analog Devices, Inc. All rights reserved.