Data Sheet
ADG1534
4.5 Ω RON, 1.8 V Logic-Compatible Quad SPDT Switch
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► 4.5 Ω typical on resistance for +5 V to −8 V supply at 25°C
► 1.2 Ω on-resistance flatness for +5 V to −8 V supply at 25°C
► Up to 346 mA continuous current
► Fully specified
► VDD = +5 V ± 10%
► VSS = −4.5 V to −8.8 V
► No VL supply required
► 1.8 V logic-compatible inputs
► Rail-to-rail operation
► 20-lead, 4 mm × 4 mm LFCSP
APPLICATIONS
Figure 1. Functional Block Diagram
► LDMOS power amplifier gate drive
► GaN power amplifier gate drive
► Communication systems
► Automatic test equipment
► Data acquisition systems
PRODUCT HIGHLIGHTS
1. 8 Ω maximum on resistance over temperature.
2. Minimum distortion.
3. 1.8 V logic-compatible digital inputs.
4. No logic power supply (VL) required.
5. 20-lead, 4 mm × 4 mm LFCSP.
► Sample-and-hold systems
GENERAL DESCRIPTION
The ADG1534 contains four independent SPDT switches. An EN
input on the ADG1534 is used to enable or disable the device.
When disabled, all channels are high impedance. The digital inputs,
INx, are 1.8 V logic-compatible and suitable for low voltage logic
controls.
The ADG1534 is fully specified at VDD = +5 V ± 10% and VSS
= −4.5 V to −8.8 V for applications that require asymmetrical
supplies. The ultra-low on resistance and on-resistance flatness of
the switches makes it an ideal solution for data acquisition and
gain switching applications, where low distortion is critical. The
construction ensures ultra-low power dissipation, making the device
ideally-suited for portable and battery-powered instruments.
The switch conducts equally well in both directions when on and
has an input signal range that extends to the supplies. In the off
condition, signal levels up to the supplies are blocked. All channels
exhibit a break-before-make switching action that prevents momen-
tary shorting when switching channels.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT