Data Sheet
ADG1519
3.8 Ω On-Resistance, SPDT Switch
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► 3.8 Ω on resistance
► Specified at
► VDD = +5 V ± 10%
► VSS = –4.5 V to –8.8 V
► No VL supply required
► 3 V logic-compatible inputs
► Up to 310 mA continuous current
► Rail-to-rail operation
► 8-lead, 2 mm × 3 mm LFCSP
APPLICATIONS
► LDMOS power amplifier gate drive
► GAN power amplifier gate drive
► Communication systems
Figure 1.
PRODUCT HIGHLIGHTS
► Automatic test equipment
► Data acquisition systems
1. 5.2 Ω maximum on resistance at 25°C.
2. –98 dB THD.
► Sample-and-hold systems
3. 3 V logic-compatible digital inputs: VINH = 2.0 V minimum and
VINL = 0.8 V maximum.
4. No logic power supply voltage (VL) required.
GENERAL DESCRIPTION
5. 8-lead, 2 mm × 3 mm LFCSP (see the Outline Dimensions
The ADG1519 is a single-pole, double throw (SPDT) switch. An EN
input on the lead frame chip scale package (LFCSP) is used to
enable or disable the device. When disabled, the switch terminals
(SA, SB, and D) are high impedance.
section).
The ADG1519 is fully specified at VDD = +5 V ± 10% and VSS
=
–4.5 V to –8.8 V for applications that require asymmetrical supplies.
The ADG1519 on-resistance profile is flat over the full analog input
range, ensuring excellent linearity and low distortion when switching
audio signals. The construction ensures ultra low power dissipation,
making the device ideally suited for portable and battery-powered
instruments.
The switch conducts equally well in both directions when on and
has an input signal range that extends to the supplies. In the
off condition, signal levels up to the supplies are blocked. The
ADG1519 exhibits break-before-make switching action for use in
multiplexer applications.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT