ADG1211

更新时间： 2024-02-18 14:20:39

品牌	Logo	应用领域
亚德诺 - ADI		开关
页数	文件大小	规格书
16页	268K
描述
1 pF Off Capacitance, 1 pC Charge Injection, 【15 V/12 V iCMOS⑩ Quad SPST Switches

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ADG1211 技术参数

是否无铅：	含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	TSSOP
包装说明：	TSSOP, TSSOP16,.25	针数：	16
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.3
其他特性：	ALSO OPERATES AT +12 V SUPPLY	模拟集成电路 - 其他类型：	SPST
JESD-30 代码：	R-PDSO-G16	JESD-609代码：	e3
长度：	5 mm	湿度敏感等级：	1
负电源电压最大值（Vsup）：	-16.5 V	负电源电压最小值（Vsup）：	-13.5 V
标称负供电电压 (Vsup)：	-15 V	信道数量：	1
功能数量：	4	端子数量：	16
标称断态隔离度：	75 dB	通态电阻匹配规范：	5 Ω
最大通态电阻 (Ron)：	120 Ω	最高工作温度：	125 °C
最低工作温度：	-40 °C	输出：	SEPARATE OUTPUT
封装主体材料：	PLASTIC/EPOXY	封装代码：	TSSOP
封装等效代码：	TSSOP16,.25	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	峰值回流温度（摄氏度）：	260
电源：	12/+-15 V	认证状态：	Not Qualified
座面最大高度：	1.1 mm	子类别：	Multiplexer or Switches
最大供电电压 (Vsup)：	16.5 V	最小供电电压 (Vsup)：	13.5 V
标称供电电压 (Vsup)：	15 V	表面贴装：	YES
最长接通时间：	125 ns	切换：	BREAK-BEFORE-MAKE
技术：	CMOS	温度等级：	AUTOMOTIVE
端子面层：	Matte Tin (Sn)	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	30	宽度：	4.4 mm
Base Number Matches：	1

ADG1211 数据手册

1 pF Off Capacitance, 1 pC Charge Injection,

1ꢀ ꢁV1ꢂ ꢁ

CMOS™ Quad SPST Switches

Preliminary Technical Data

ADG1ꢂ11VADG1ꢂ1ꢂVADG1ꢂ13

FUNCTIONAL BLOCK DIAGRAM

FEATURES

2 pF off capacitance

1 pC charge injection

33 V supply range

150 Ω on resistance

Fully specified at +12 V, 15 V

No V_Lsupply required

3 V logic-compatible inputs

Rail-to-rail operation

16-lead TSSOP and 16-lead LFCSP packages

Typical power consumption: <0.03 µW

IN1

IN2

IN3

IN4

IN1

IN2

IN3

IN4

IN2

IN3

IN4

ADG1211

ADG1212

ADG1213

SWITCHES SHOWN FOR A LOGIC 1 INPUT

APPLICATIONS

Figure 1.

Automatic test equipment

Data aquisition systems

Battery-powered systems

Sample-and-hold systems

Audio signal routing

iCMOS construction ensures ultralow power dissipation,

making the parts ideally suited for portable and battery-

powered instruments.

The ADG1211/ADG1212/ADG1213 contain four independent

single-pole/single-throw (SPST) switches. The ADG1211 and

ADG1212 differ only in that the digital control logic is inverted.

The ADG1211 switches are turned on with Logic 0 on the

appropriate control input, while Logic 1 is required for the

ADG1212. The ADG1213 has two switches with digital control

logic similar to that of the ADG1211; the logic is inverted on the

other two switches. Each switch conducts equally well in both

directions when on, and has an input signal range that extends

to the supplies. In the off condition, signal levels up to the

supplies are blocked.

Video signal routing

Communication systems

GENERAL DESCRIPTION

The ADG1211/ADG1212/ADG1213 are monolithic CMOS

devices containing four independently selectable switches

designed on an iCMOS process. iCMOS (industrial-CMOS) is a

modular manufacturing process combining high voltage CMOS

(complementary metal-oxide semiconductor) and bipolar

technologies. It enables the development of a wide range of high

performance analog ICs capable of 30 V operation in a footprint

that no previous generation of high voltage parts has been able

to achieve. Unlike analog ICs using conventional CMOS proc-

esses, iCMOS components can tolerate high supply voltages,

while providing increased performance, dramatically lower

power consumption, and reduced package size.

The ADG1213 exhibits break-before-make switching action for

use in multiplexer applications. Inherent in the design is low

charge injection for minimum transients when switching the

digital inputs.

PRODUCT HIGHLIGHTS

1. 2 pF off capacitance ( 1ꢀ V supply).

2. 1 pC charge injection.

3. 3 V logic-compatible digital inputs: V_IH= 2.0 V, V_IL= 0.8 V.

4. No V_Llogic power supply required.

ꢀ. Ultralow power dissipation: <0.03 µW.

6. 16-lead TSSOP and 4 mm × 4 mm LFCSP packages.

The ultralow capacitance and charge injection of these switches

make them ideal solutions for data acquisition and sample-and-

hold applications, where low glitch and fast settling are required.

Fast switching speed coupled with high signal bandwidth make

the parts suitable for video signal switching.

Rev. PrE

Information furnished by Analog Devices is believed to be accurate and reliable.

However, no responsibility is assumed by Analog Devices for its use, nor for any

infringements of patents or other rights of third parties that may result from its use.

Specifications subject to change without notice. No license is granted by implication

or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

Fax: 781.326.8703

www.analog.com

12 3 4 5 6 7...16

中文翻译

下载PDF

与ADG1211相关器件

型号	品牌	获取价格	描述	数据表
ADG1211_12	ADI	获取价格	Low Capacitance, Low Charge Injection, Â±15 V
ADG1211_15	ADI	获取价格	Low Capacitance, Low Charge Injection
ADG1211YCP	ADI	获取价格	1 pF Off Capacitance, 1 pC Charge Injection,
ADG1211YCPZ-500RL7	ADI	获取价格	Low Capacitance, Low Charge Injection, Â±15 V
ADG1211YCPZ-REEL7	ADI	获取价格	Low Capacitance, Low Charge Injection, Â±15 V
ADG1211YRU	ADI	获取价格	1 pF Off Capacitance, 1 pC Charge Injection,
ADG1211YRUZ	ADI	获取价格	Low Capacitance, Low Charge Injection, Â±15 V
ADG1211YRUZ-REEL	ADI	获取价格	Low Capacitance, Low Charge Injection, Â±15 V
ADG1211YRUZ-REEL7	ADI	获取价格	Low Capacitance, Low Charge Injection, Â±15 V
ADG1212	ADI	获取价格	1 pF Off Capacitance, 1 pC Charge Injection,

与ADG1211相关文章

MBRS340T3G手册解读：参数说明、产品特性及应用
2024-06-28

1
PMOS管背靠背连接：串联还是并联？
2024-06-28

1
高压电解电容的分类与选型策略
2024-06-28

2
数码管：基本概念、分类、技术发展及市场趋势
2024-06-27

6

产品中心

服务支持

精选活动

关于我们

帮助中心

ADG1211

ADG1211 技术参数

ADG1211 数据手册

与ADG1211相关器件

与ADG1211相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ADG1211

ADG1211 技术参数

ADG1211 数据手册

与ADG1211相关器件

与ADG1211相关文章

您还可以找

您在本页遇到什么问题？