Datasheet > 信号电路 > 其他模拟IC> ADE7751ARSZRL

ADE7751ARSZRL

更新时间： 2024-11-11 13:00:27

品牌	Logo	应用领域
亚德诺 - ADI		/
页数	文件大小	规格书
16页	416K
描述
Single Phase Energy Metering IC with On-Chip Fault Detection

阅读下载

中文翻译

获取价格

数据手册
替代型号

如果您发现信息不准确，欢迎纠错

ADE7751ARSZRL 数据手册

Energy Metering IC

with On-Chip Fault Detection

ADE7751^*

FEATURES

The only analog circuitry used in the ADE7751 is in the ADCs

and reference circuit. All other signal processing (e.g., multipli-

cation and filtering) is carried out in the digital domain. This

approach provides superior stability and accuracy over extremes

in environmental conditions and over time.

High Accuracy, Surpasses 50 Hz/60 Hz IEC 687/1036

Less than 0.1% Error over a Dynamic Range of 500 to 1

Supplies Average Real Power on the Frequency

Outputs F1 and F2

High-Frequency Output CF Is Intended for Calibration

and Supplies Instantaneous Real Power

Continuous Monitoring of the Phase and Neutral

Current Allows Fault Detection in 2-Wire

Distribution Systems

ADE7751 Uses the Larger of the Two Currents (Phase

or Neutral) to Bill—Even During a Fault Condition

Two Logic Outputs (FAULT and REVP) Can Be Used to

Indicate a Potential Miswiring or Fault Condition

Direct Drive for Electromechanical Counters and

2-Phase Stepper Motors (F1 and F2)

A PGA in the Current Channel Allows the Use of Small

Values of Shunt and Burden Resistance

Proprietary ADCs and DSP Provide High Accuracy over

Large Variations in Environmental Conditions and Time

On-Chip Power Supply Monitoring

On-Chip Creep Protection (No Load Threshold)

On-Chip Reference 2.5 V ؎ 8% (30 ppm/؇C Typical)

with External Overdrive Capability

The ADE7751 incorporates a novel fault detection scheme that

warns of fault conditions and allows the ADE7751 to continue

accurate billing during a fault event. The ADE7751 does this

by continuously monitoring both the phase and neutral (return)

currents. A fault is indicated when these currents differ by more

than 12.5%. Billing is continued using the larger of the two currents.

The ADE7751 supplies average real power information on the

low-frequency outputs F1 and F2. These logic outputs may be

used to directly drive an electromechanical counter or interface

to an MCU. The CF logic output gives instantaneous real power

information. This output is intended to be used for calibration purposes.

The ADE7751 includes a power supply monitoring circuit on the

AV_DDsupply pin. The ADE7751 will remain in a reset condition

until the supply voltage on AV_DDreaches 4 V. If the supply falls

below 4 V, the ADE7751 will also be reset and no pulses will be

issued on F1, F2, and CF.

Internal phase matching circuitry ensures that the voltage and

current channels are matched whether the HPF in Channel 1 is

on or off. The ADE7751 also has anticreep protection.

Single 5 V Supply, Low Power (15 mW Typical)

Low-Cost CMOS Process

The ADE7751 is available in 24-lead DIP and SSOP packages.

GENERAL DESCRIPTION

The ADE7751 is a high-accuracy, fault-tolerant electrical energy

measurement IC that is intended for use with 2-wire distribution

systems. The part specifications surpass the accuracy require-

ments as quoted in the IEC1036 standard.

FUNCTIONAL BLOCK DIAGRAM

FAULT

AC/DC DV

DGND

G0 G1

AGND

ADE7751

POWER

SUPPLY MONITOR

SIGNAL

PROCESSING

BLOCK

A<>B

V1A

V1N

V1B

...110101...

ADC

PGA

HPF

A>B

⌽

PHASE

...110101...

ADC

CORRECTION

MULTIPLIER

B>A

PGA

LPF

V2P

V2N

...11011001...

ADC

DIGITAL-TO-FREQUENCY

CONVERTER

4k⍀

2.5V

REFERENCE

REF

CLKIN CLKOUT SCF S0 S1 REVP CF

F2RESET

IN/OUT

*US Patent 5,745,323; 5,760,617; 5,862,069; 5,872,469.

REV. 0

Information furnished by Analog Devices is believed to be accurate and

reliable. However, no responsibility is assumed by Analog Devices for its

use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat

may result from its use. No license is granted by implication or otherwise

under any patent or patent rights of Analog Devices.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781/329-4700

Fax: 781/326-8703

www.analog.com

12 3 4 5 6 7...16

中文翻译

下载PDF

ADE7751ARSZRL 替代型号

型号	品牌	替代类型	描述	数据表
ADE7751ARS	ADI	完全替代	Energy Metering IC with On-Chip Fault Detection
ADE7751ARSRL	ADI	功能相似	Energy Metering IC with On-Chip Fault Detection

与ADE7751ARSZRL相关器件

型号	品牌	获取价格	描述	数据表
ADE7752	ADI	获取价格	Three Phase Energy Metering IC with Pulse Output
ADE7752_15	ADI	获取价格	Polyphase Energy Metering IC with Pulse Output
ADE7752A	ADI	获取价格	Polyphase Energy Metering IC with Pulse Output
ADE7752A_15	ADI	获取价格	Polyphase Energy Metering IC with Pulse Output
ADE7752AAR	ADI	获取价格	Polyphase Energy Metering IC with Pulse Output
ADE7752AAR-RL	ADI	获取价格	Polyphase Energy Metering IC with Pulse Output
ADE7752AARZ	ADI	获取价格	Polyphase Energy Metering IC with Pulse Output
ADE7752AARZ-RL	ADI	获取价格	Polyphase Energy Metering IC with Pulse Output
ADE7752AR	ADI	获取价格	Three Phase Energy Metering IC with Pulse Output
ADE7752ARRL	ADI	获取价格	Polyphase Energy Metering IC with Pulse Output

与ADE7751ARSZRL相关文章

国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

23
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

7
AMD宣布全球裁员约1000人，调整战略聚焦增长
2024-11-14

8
英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

31

产品中心

服务支持

精选活动

关于我们

帮助中心

ADE7751ARSZRL

ADE7751ARSZRL 数据手册

ADE7751ARSZRL 替代型号

与ADE7751ARSZRL相关器件

与ADE7751ARSZRL相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ADE7751ARSZRL

ADE7751ARSZRL 数据手册

ADE7751ARSZRL 替代型号

与ADE7751ARSZRL相关器件

与ADE7751ARSZRL相关文章

您还可以找

您在本页遇到什么问题？