Rail-to-Rail, Fast, Low Power, 2.5 V to 5.5 V,
Single-Supply TTL/CMOS Comparators
Preliminary Technical Data
ADCMP608/ACMP609
FUNCTIONAL BLOCK DIAGRAMS
FEATURES
10 mV sensitivity rail to rail at VCC = 2.5 V
NONINVERTING
+
INPUT
Input common-mode voltage from −0.2 V to VCC + 0.2 V
Low glitch CMOS-/TTL-compatible output stage
30 ns propagation delay
Q OUTPUT
ADCMP608
INVERTING
INPUT
–
1 mW at 2.5 V
Shutdown pin
Single-pin control for programmable hysteresis and latch
Power supply rejection >60 dB
−40C° to +125C° operation
S
DN
NONINVERTING
INPUT
+
Q OUTPUT
Q OUTPUT
APPLICATIONS
ADCMP609
High speed instrumentation
Clock and data signal restoration
Logic level shifting or translation
High speed line receivers
INVERTING
INPUT
–
Threshold detection
LE/HYS
S
DN
Peak and zero-crossing detectors
High speed trigger circuitry
Pulse-width modulators
Figure 1.
Current-/voltage-controlled oscillators
GENERAL DESCRIPTION
The ADCMP608 and ADCMP609 are fast comparators
fabricated on Analog Devices’ proprietary XFCB2 process.
These comparators are exceptionally versatile and easy to use.
Features include an input range from VEE − 0.5 V to VCC + 0.5 V,
low noise, TTL-/CMOS-compatible output drivers, and latch
inputs with adjustable hysteresis and/or shutdown inputs.
The TTL-/CMOS-compatible output stage is designed to drive
up to 15 pF with full rated timing specs and to degrade in a
graceful and linear fashion as additional capacitance is added.
The comparator input stage offers robust protection against
large input overdrive, and the outputs do not phase reverse
when the valid input signal range is exceeded. High speed latch
and programmable hysteresis features are also provided in a
unique single-pin control option.
The devices offer 30 ns propagation delays driving a 15 pF load
with 5 mV overdrive on 350/400 μA typical supply current. A
flexible power supply scheme allows the devices to operate with
a single +2.5 V positive supply and a −0.5 V to +3.0 V input
signal range up to a +5.5 V positive supply with a −0.5 V to +6V
input signal range. Split input/output supplies, with no
sequencing restrictions on the ADCMP609, support a wide
input signal range while allowing independent output swing
control.
The ADCMP608 is available in a tiny 6-lead SC70 package with
single-ended output and a shutdown pin.
The ADCMP609, available in an 8-lead MSOP package, features
a shutdown pin, single pin latch, and hysteresis control.
+
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.