Dual 0.275% Comparators and Reference
with Programmable Hysteresis
ADCMP341/ADCMP343
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
V
DD
400 mV 0.275% threshold
User programmable hysteresis via resistor string
Supply range: 1.7 V to 5.5 V
Low quiescent current: 6.5 μA typical
Input range includes ground
Low input bias current: 5 nA maximum
Open-drain outputs
Supports wired-AND connections
Input polarities:
ADCMP341 noninverting
ADCMP341
VINA
R1
+INA_U
+INA_L
OUTA
OUTB
R2
R3
400mV
VINB
+INB_U
+INB_L
ADCMP343 inverting
Small SOT-23 package
GND
APPLICATIONS
Figure 1. ADCMP341
Portable applications
Li-Ion monitoring
Handheld instruments
LED/relay driving
Optoisolator driving
Control systems
V
DD
ADCMP343
VINA
R1
–INA_U
–INA_L
OUTA
OUTB
R2
R3
GENERAL DESCRIPTION
400mV
The ADCMP341/ADCMP343 consist of two low power, high
accuracy comparators with a 400 mV reference in an 8-lead
SOT-23 package. Operating within a supply range of 1.7 V to
5.5 V, the devices only draw 6.5 μA (typical), making them ideal
for low voltage system monitoring and portable applications.
VINB
–INB_U
–INB_L
Hysteresis is determined using three resistors in a string configura-
tion with the upper and lower tap points connected to the
± ±IA_U and ± ±IA_L pins of each comparator, respectively.
The state of the outputs of the comparators selects which pin is
internally connected to the comparators input. Therefore, a
change of state in the comparators output results in one of the
inputs being switched in to the comparator and the other being
switched out. This provides the user with a fully flexible and
accurate method of setting the hysteresis. One input of each
comparator is internally connected to the reference. The other
input is available externally, via an internal mux, through pins
± ±IA_U or ± ±IA_L. The state of the output determines which
of these pins is connected at any one time.
GND
Figure 2. ADCMP343
R1 = 22kΩ
R2 = 2.2kΩ
R3 = 6.2kΩ
OUTA
1
V
IN
2
The comparator outputs are open-drain with the output stage
sinking capability guaranteed greater than 5 mA over temperature.
The ADCMP341 has noninverting inputs and the ADCMP343
has inverting inputs. The devices are suitable for portable,
commercial, industrial, and automotive applications.
CH1 2.00V
CH2 500mV
M100ms
Figure 3. Hysteresis programmed to 513 mV @ VIN on ADCMP341
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2007 Analog Devices, Inc. All rights reserved.