November 2004
ADC10080
10-Bit, 80 MSPS, 3V, 78.6 mW A/D Converter
General Description
Features
n Single +3.0V operation
The ADC10080 is a monolithic CMOS analog-to-digital con-
verter capable of converting analog input signals into 10-bit
digital words at 80 Megasamples per second (MSPS). This
converter uses a differential, pipeline architecture with digital
error correction and an on-chip sample-and-hold circuit to
provide a complete conversion solution, and to minimize
power consumption, while providing excellent dynamic per-
formance. A unique sample-and-hold stage yields a full-
power bandwidth of 400 MHz. Operating on a single 3.0V
power supply, this device consumes just 78.6 mW at
80 MSPS, including the reference current. The Standby
feature reduces power consumption to just 15 mW.
n Selectable 2.0 VP-P, 1.5 VP-P, or 1.0 VP-P full-scale input
swing
n 400 MHz −3 dB input bandwidth
n Low power consumption
n Standby mode
n On-chip reference and sample-and-hold amplifier
n Offset binary or two’s complement data format
n Separate adjustable output driver supply to
accommodate 2.5V and 3.3V logic families
n 28-pin TSSOP package
The differential inputs provide a full scale selectable input
swing of 2.0 VP-P, 1.5 VP-P, 1.0 VP-P, with the possibility of a
single-ended input. Full use of the differential input is recom-
mended for optimum performance. An internal +1.2V preci-
sion bandgap reference is used to set the ADC full-scale
range, and also allows the user to supply a buffered refer-
enced voltage for those applications requiring increased ac-
curacy. The output data format is 10-bit offset binary, or two’s
complement.
Key Specifications
n Resolution
10 Bits
80 MSPS
400 MHz
n Conversion Rate
n Full Power Bandwidth
n DNL
n SNR (fIN = 10 MHz)
n SFDR (fIN = 10 MHz)
n Data Latency
0.25 LSB (typ)
59.5 dB (typ)
−78.7 dB (typ)
6 Clock Cycles
+3.0V
This device is available in the 28-lead TSSOP package and
will operate over the industrial temperature range of −40˚C to
+85˚C.
n Supply Voltage
n Power Consumption, 80 MHz
78.6 mW
Applications
n Ultrasound and Imaging
n Instrumentation
n Cellular Based Stations/Communications Receivers
n Sonar/Radar
n xDSL
n Wireless Local Loops
n Data Acquisition Systems
n DSP Front Ends
Connection Diagram
20048501
© 2004 National Semiconductor Corporation
DS200485
www.national.com