5秒后页面跳转
捷配首页

Datasheet > ADC10064CIWM/UGN8
ADC10064CIWM/UGN8 PDF预览

ADC10064CIWM/UGN8

更新时间： 2024-11-10 02:58:19
品牌 Logo 应用领域
德州仪器 - TI 光电二极管转换器
页数 文件大小 规格书
22页 1170K
描述
A/D Converter

阅读下载

中文翻译

获取价格

ADC10064CIWM/UGN8 技术参数

是否无铅： 含铅是否Rohs认证： 不符合
生命周期：Obsolete包装说明：SOP,
Reach Compliance Code：not_compliant风险等级：5.5
最大模拟输入电压：5.55 V最小模拟输入电压：-0.05 V
最长转换时间：0.9 µs转换器类型：ADC, FLASH METHOD
JESD-30 代码：R-PDSO-G28JESD-609代码：e0
长度：17.9 mm最大线性误差 (EL)：0.1465%
湿度敏感等级：3模拟输入通道数量：4
位数：10功能数量：1
端子数量：28最高工作温度：85 °C
最低工作温度：-40 °C输出位码：BINARY
输出格式：PARALLEL, WORD封装主体材料：PLASTIC/EPOXY
封装代码：SOP封装形状：RECTANGULAR
封装形式：SMALL OUTLINE峰值回流温度（摄氏度）：260
采样速率：0.8 MHz采样并保持/跟踪并保持：SAMPLE
座面最大高度：2.65 mm标称供电电压：5 V
表面贴装：YES技术：CMOS
温度等级：INDUSTRIAL端子面层：Tin/Lead (Sn/Pb)
端子形式：GULL WING端子节距：1.27 mm
端子位置：DUAL处于峰值回流温度下的最长时间：NOT SPECIFIED
宽度：7.5 mm

ADC10064CIWM/UGN8 数据手册

 浏览型号ADC10064CIWM/UGN8的Datasheet PDF文件第2页浏览型号ADC10064CIWM/UGN8的Datasheet PDF文件第3页浏览型号ADC10064CIWM/UGN8的Datasheet PDF文件第4页浏览型号ADC10064CIWM/UGN8的Datasheet PDF文件第5页浏览型号ADC10064CIWM/UGN8的Datasheet PDF文件第6页浏览型号ADC10064CIWM/UGN8的Datasheet PDF文件第7页 
ADC10061, ADC10062, ADC10064  
www.ti.com  
SNAS069E –JUNE 1999–REVISED MARCH 2013  
ADC10061/ADC10062/ADC10064 10-Bit 600 ns A/D Converter with Input Multiplexer and  
Sample/Hold  
Check for Samples: ADC10061, ADC10062, ADC10064  
1
FEATURES  
DESCRIPTION  
NOTE: The ADC10061 and ADC10062 are obsolete.  
They are described here for reference only.  
2
•
Built-in Sample-and-Hold  
Single +5V Supply  
•
•
•
Using an innovative, patented multistep* conversion  
technique, these CMOS analog-to-digital converters  
offer sub-microsecond conversion times yet dissipate  
a maximum of only 235 mW. These converters  
perform 10-bit conversions in two lower-resolution  
“flashes”, yielding a fast A/D without the cost, power  
consumption, and other problems associated with  
true flash approaches.  
No External Clock Required  
Speed Adjust Pin for Faster Conversions  
(ADC10062 and ADC10064). See ADC10662/4  
for High Speed Ensured Performance.  
APPLICATIONS  
•
•
•
•
Digital Signal Processor Front Ends  
Instrumentation  
The analog input voltage is sampled and held by an  
internal sampling circuit. Input signals at frequencies  
from DC to over 200 kHz can, therefore, be digitized  
accurately without the need for an external sample-  
and-hold circuit.  
Disk Drives  
Mobile Telecommunications  
KEY SPECIFICATIONS  
The ADC10062 and ADC10064 include a “speed-up”  
pin. Connecting an external resistor between this pin  
and ground reduces the typical conversion time to as  
little as 350 ns with only a small increase in linearity  
error.  
•
•
•
•
•
Conversion Time 600 ns Typical, 900 ns Max  
Sampling Rate 800 kHz  
Low Power Dissipation 235 mW (Max)  
Total Unadjusted Error ±1.0 LSB (Max)  
No Missing Codes Over Temperature  
For ease of interface to microprocessors, the  
ADC10061, ADC10062, and ADC10064 have been  
designed to appear as a memory location or I/O port  
without the need for external interface logic.  
*U.S. Patent Number 4918449  
Simplified Block Diagram  
*ADC10061 Only, **ADC10062 and ADC10064 Only, ***ADC10064 Only  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
All trademarks are the property of their respective owners.  
2
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 1999–2013, Texas Instruments Incorporated  
1234567...22

中文翻译

下载PDF

与ADC10064CIWM/UGN8相关器件

型号 品牌 获取价格 描述 数据表
ADC10064CIWMX ETC

获取价格

 		Single-Ended Data Acquisition System
ADC10064CIWMX/NOPB TI

获取价格

 		10-Bit 600 ns A/D Converter with Input Multiplexer and Sample/Hold 28-SOIC -40 to 85
ADC10064CMJ TI

获取价格

 		10-BIT FLASH METHOD ADC, PARALLEL ACCESS, CDIP28, CERDIP-28
ADC10064CMJ/883 ETC

获取价格

 		Single-Ended Data Acquisition System
ADC10064CMJ-QML NSC

获取价格

 		IC,DATA ACQ SYSTEM,1-CHANNEL,10-BIT,DIP,24PIN,CERAMIC
ADC10065 NSC

获取价格

 		ADC10065 10-Bit 65 MSPS 3V A/D Converter
ADC10065 TI

获取价格

 		10 位、65MSPS 模数转换器 (ADC)
ADC10065CIMT NSC

获取价格

 		ADC10065 10-Bit 65 MSPS 3V A/D Converter
ADC10065CIMT/NOPB NSC

获取价格

 		IC 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO28, TSSOP-28, Analog to Digita
ADC10065CIMT/NOPB TI

获取价格

 		10 位、65MSPS 模数转换器 (ADC) | PW | 28 | -40 to 85

与ADC10064CIWM/UGN8相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证