December 1994
ADC0833 8-Bit Serial I/O A/D Converter
with 4-Channel Multiplexer
General Description
Features
Y
NSC MICROWIRE compatible–direct interface to COPS
family processors
The ADC0833 series is an 8-bit successive approximation
A/D converter with a serial I/O and configurable input multi-
plexer with 4 channels. The serial I/O is configured to com-
ply with the NSC MICROWIRETM serial data exchange stan-
dard for easy interface to the COPSTM family of processors,
as well as with standard shift registers or mPs.
Y
Easy interface to all microprocessors, or operates
‘‘stand alone’’
Y
Y
Y
Y
Y
Works with 2.5V (LM336) voltage reference
No full-scale or zero adjust required
Differential analog voltage inputs
The 4-channel multiplexer is software configured for single-
ended or differential inputs when channel assigned by a 4-
bit serial word.
4-channel analog multiplexer
Shunt regulator allows operation with high voltage
supplies
The differential analog voltage input allows increasing the
common-mode rejection and offsetting the analog zero in-
put voltage value. In addition, the voltage reference input
can be adjusted to allow encoding any smaller analog volt-
age span to the full 8 bits of resolution.
Y
Y
Y
Y
0V to 5V input range with single 5V power supply
Remote operation with serial digital data link
TTL/MOS input/output compatible
0.3 standard width 14-pin DIP package
×
Key Specifications
Y
Resolution
8 Bits
g
1 LSB
Y
Y
Y
Y
g
Total Unadjusted Error
Single Supply
(/2 LSB and
5 V
DC
Low Power
23 mW
Conversion Time
32 ms
Connection and Functional Diagrams
Dual-In-Line Package (J and N)
TL/H/5607–14
Top View
Order Number ADC0833CCJ,
ADC0833BCN or ADC0833CCN
See NS Package Number
J14A or N14A
TL/H/5607–1
COPSTM and MICROWIRETM are trademarks of National Semiconductor Corporation.
TRI-STATEÉ is a registered trademark of National Semiconductor Corporation.
C
1995 National Semiconductor Corporation
TL/H/5607
RRD-B30M115/Printed in U. S. A.