Dual, Low Power, Wideband, Low Noise,
Rail-to-Rail Output, Operational Amplifiers
ADA4691-2/ADA4692-2
PIN CONFIGURATIONS
FEATURES
Low power: 200 μA typical, 250 μA maximum
Low distortion: 0.003% THD + N
Low noise: 16 nV/√Hz typical
OUT A
–IN
1
2
3
4
8
7
6
5
V+
ADA4692-2
OUT B
–IN B
+IN B
+IN
TOP VIEW
(Not to Scale)
V–
3.9 MHz bandwidth
Slew rate: 1.4 V/μs typical
Figure 1. 8-Lead SOIC_N (R-8)
Offset voltage: 500 μV typical
Low offset voltage drift: 4 μV/°C maximum
Very low input bias currents: 0.5 pA typical
2.7 V to 5 V single supply or 1.35 V to 2.5 V dual supply
APPLICATIONS
–IN A 1
8 OUT B
ADA4691-2
Portable audio: MP3, PDA, smart phone, notebook
Portable instrumentation
Portable medical devices
Photodiode amplifiers
Sensor amplifiers
+IN A 2
V– 3
7 –IN B
6 +IN B
TOP VIEW
(Not to Scale)
Figure 2. 10-Lead LFCSP (CP-10-11)
Low-side current sense
ADC drivers
Active filters
Sample-and-hold
Automotive sensors
GENERAL DESCRIPTION
The ADA4691-2 and ADA4692-2 are dual, rail-to-rail output,
single-supply amplifiers featuring low power, wide bandwidth,
and low noise. The ADA4691-2 has two independent shutdown
pins, allowing further reduction in supply current. These
amplifiers are ideal for a wide variety of applications. Audio
preamps, filters, IR/photodiode amplifiers, charge amps, and
high impedance sensors all benefit from this combination of
performance features.
enough gain and slew rate response over the audio band at low
power. Industrial applications with high impedance sensors,
such as pyroelectric sensors and other IR sensors, benefit from
the high impedance input, low offset drift, and enough
bandwidth and response for low gain applications.
The ADA4691-2 and ADA4692-2 are specified over the extended
industrial temperature range (−40°C to +125°C). The ADA4691-2
is available in a 10-lead LFCSP package, and the ADA4692-2 is
available in an 8-lead SOIC package.
Applications for these amplifiers include consumer audio
personal players with low noise and low distortion that provide
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2009 Analog Devices, Inc. All rights reserved.