Data Sheet
ADA4099-1/ADA4099-2
50 V, 8 MHz, 1.5 mA per Channel, Robust, Over-The-Top, Precision Op Amps
FEATURES
GENERAL DESCRIPTION
► Ultrawide common-mode range: −VS − 0.1 V to −VS + 70 V
► Wide power supply voltage range: (VSY): +3.15 V to +50 V (±25
V for PSRR)
► Low supply current: 1.5 mA per channel (typical)
► Low input offset voltage: ±40 µV maximum
► Low input offset voltage drift: ±0.4 μV/°C maximum
► Low voltage noise:
► 1/f noise corner: 6 Hz typical
► 150 nV p-p typical at 0.1 Hz to 10 Hz
► 7 nV/√Hz typical at 100 Hz (en)
► High speed
► GBP: 8 MHz typical
► Slew rate: 5.5 V/µs typical at ΔVOUT = 25 V
► Low power shutdown: 20 µA maximum
► Low input bias current: ±10 nA maximum
► Large signal voltage gain: 120 dB minimum
► CMRR: 118 dB, minimum
The ADA4099-1 and ADA4099-2 are single/dual robust, precision,
rail-to-rail input/output operational amplifiers (op amps) with inputs
that operate from −VS to +VS and beyond, which is referred to
™
in this data sheet as Over-The-Top . The devices feature offset
voltages of <40 µV, input bias currents (IB) of <10 nA, and can
operate on single or split supplies that range from 3.15 V to 50 V.
The ADA4099-1 and ADA4099-2 draws 1.5 mA of quiescent current
per channel.
The ADA4099-1 and ADA4099-2 Over-The-Top input stages have
robust input protection features for abusive environments. The
inputs can tolerate up to 80 V of differential voltage without damage
or degradation to dc accuracy. The operating input common-mode
range extends from rail-to-rail and beyond, up to 70 V > –VS,
independent of the +VS supply.
The ADA4099-1 and ADA4099-2 are unity-gain stable and can
drive loads requiring up to 20 mA per channel. The device can
also drive capacitive loads as large as 100 pF. The amplifiers are
available with low power shutdown.
The ADA4099-1 is available in a standard, 6-lead, thin small outline
transistor (TSOT) package. The ADA4099-2 is available in an 8-
lead, standard small outline package (SOIC_N), 8-lead, mini small
outline package (MSOP), and a 10-lead, lead frame chip scale
package (LFCSP).
► PSRR: 123 dB, minimum
► Input overdrive tolerant with no phase reversal
► ±2 kV HBM and ±1.25 kV FICDM
► Wide temperature range: −55°C to +150°C (H grade)
APPLICATIONS
► Industrial sensor conditioning
► Supply current sensing
► Battery and power supply monitoring
► Front-end amplifiers in abusive environments
► 4 mA to 20 mA transmitters
TYPICAL APPLICATION CIRCUIT
Figure 1. 1 V/A Over-The-Top Current Sense Application (ADA4099-1 6-lead
TSOT)
Figure 2. Output Error vs. Load Current
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT