50 V, 130 kHz, 32.5 μA, Robust,
Over-The-Top Precision Op Amp
ADA4097-1
Data Sheet
FEATURES
GENERAL DESCRIPTION
Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V
Wide power supply voltage range: +3 V to +50 V (to 25 V for PSRR)
Low power supply current: 32.5 μA (typical)
Low input offset voltage: 60 μV maximum
Low input offset voltage drift: 1 μVꢀ/C maximum (B grade)
Low input voltage noise
The ADA4097-1 is a robust, precision, rail-to-rail input and output
operational amplifier (op amp) with inputs that operate from −VS
to +VS and beyond, which is referred to in this data sheet as Over-
The-Top™. The device features offset voltages of <60 μV, input bias
currents (IB) of <0.3 nA, and can operate on single or split supplies
that range from 3 V to 50 V. The ADA4097-1 draws 32.5 μA of
supply current.
6 Hz typical 1ꢀf noise corner
1000 nV p-p typical at 0.1 Hz to 10 Hz
The ADA4097-1 Over-The-Top input stage has robust input
protection features for abusive environments. The inputs can
tolerate up to 80 V of differential voltage without damage or
degradation to dc accuracy. The operating common-mode input
range extends from rail-to-rail and beyond, up to 70 V > –VS,
independent of the +VS supply.
GBP: 130 kHz typical for fTEST = 250 Hz
Slew rate: 0.1 Vꢀμs typical at ΔVOUT = 4 V
Low power supply current shutdown: 20 μA maximum
Low input offset current: 300 pA maximum
Large signal voltage gain: 120 dB minimum for ΔVOUT = 4 V
CMRR: 120 dB minimum at VCM = −0.1 V to +70 V
PSRR: 123 dB minimum at VSY = +3 V to 25 V
Input overdrive tolerant with no phase reversal
2 kV HBM and 1.25 kV FICDM
The ADA4097-1 is unity-gain stable and can drive loads requiring
up to 20 mA. The device can also drive capacitive loads as large as
200 pF. The amplifier is available with low power shutdown.
Wide temperature range: −55/C to +150/C (H grade)
6-lead TSOT package
The ADA4097-1 is available in a standard, 6-lead, thin small
outline transistor (TSOT) package.
APPLICATIONS
Industrial sensor conditioning
Supply current sensing
Battery and power supply monitoring
Front-end amplifiers in abusive environments
4 mA to 20 mA transmitters
TYPICAL APPLICATION CIRCUIT
5
15V
1.5V
ADA4097-1
5V
0.1Ω
3
10W
M1
V
= 1.5V TO 70V
BAT
100Ω
BSS123LT1G
SHDN
100Ω
1
0
V
OUT
1V/A
LOAD
10mA TO 1A
1kΩ
–1
–3
Figure 1. 1 V/A Over-The-Top Current Sense Application
(VBAT Is the Battery Voltage.)
–5
–7
0.001
0.01
0.1
1
LOAD CURRENT (A)
Figure 2. Output Error vs. Load Current
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks are theproperty of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2021 Analog Devices, Inc. All rights reserved.
www.analog.com