™
14-Bit, 150 MSPS TxDAC+
a
with 2؋
Interpolation Filter
AD9772
FUNCTIONAL BLOCK DIAGRAM
FEATURES
Single 2.7 V to 3.6 V Supply
CLKCOM CLKVDD
MOD0 MOD1
RESET
PLLLOCK
DIV0 DIV1
14-Bit DAC Resolution and Input Data Width
150 MSPS Input Data Rate
63.3 MHz Reconstruction Passband @ 150 MSPS
75 dBc SFDR @ 25 MHz
2؋
Interpolation Filter with High or Low Pass Response
73 dB Image Rejection with 0.005 dB Passband Ripple
“Zero-Stuffing” Option for Enhanced Direct IF
Performance
AD9772
PLLCOM
LPF
CLK+
CLK–
CLOCK DISTRIBUTION
AND MODE SELECT
PLL CLOCK
MULTIPLIER
FILTER
MUX
PLLVDD
CONTROL
CONTROL
IOUTA
IOUTB
DATA
INPUTS
(DB13...DB0)
ZERO
EDGE-
TRIGGERED
LATCHES
14-BIT DAC
STUFF
MUX
INTERPOLATION
FILTER
Internal 2؋
/4؋
Clock Multiplier
205 mW Power Dissipation; 13 mW with Power-Down
Mode
REFIO
FSADJ
+1.2V REFERENCE
AND CONTROL AMP
SLEEP
48-Lead LQFP Package
DCOM DVDD
ACOM AVDD
REFLO
APPLICATIONS
segmented current source architecture is combined with a propri-
etary switching technique to reduce spurious components and
enhance dynamic performance. Matching between the two
current outputs ensures enhanced dynamic performance in a
differential output configuration. The differential current out-
puts may be fed into a transformer or a differential op amp
topology to obtain a single-ended output voltage using an ap-
propriate resistive load.
Communication Transmit Channel
WCDMA Base Stations, Multicarrier Base Stations,
Direct IF Synthesis
Instrumentation
PRODUCT DESCRIPTION
The AD9772 is a single supply, oversampling, 14-bit digital-to-
analog converter (DAC) optimized for baseband or IF waveform
reconstruction applications requiring exceptional dynamic range.
Manufactured on an advanced CMOS process, it integrates a
complete, low distortion 14-bit DAC with a 2× digital interpola-
tion filter and clock multiplier. The on-chip PLL clock multi-
plier provides all the necessary clocks for the digital filter and the
14-bit DAC. A flexible differential clock input allows for a single-
ended or differential clock driver for optimum jitter performance.
The on-chip bandgap reference and control amplifier are config-
ured for maximum accuracy and flexibility. The AD9772 can be
driven by the on-chip reference or by a variety of external refer-
ence voltages. The full-scale current of the AD9772 can be
adjusted over a 2 mA to 20 mA range, thus providing additional
gain ranging capabilities.
The AD9772 is available in a 48-lead LQFP package and speci-
fied for operation over the industrial temperature range of –40°C
to +85°C.
For baseband applications, the 2× digital interpolation filter
provides a low pass response, hence providing up to a three-fold
reduction in the complexity of the analog reconstruction filter. It
does so by multiplying the input data rate by a factor of two
while simultaneously suppressing the original upper inband
image by more than 73 dB. For direct IF applications, the 2×
digital interpolation filter response can be reconfigured to select
the upper inband image (i.e., high pass response) while sup-
pressing the original baseband image. To increase the signal
level of the higher IF images and their passband flatness in di-
rect IF applications, the AD9772 also features a “zero stuffing”
option in which the data following the 2× interpolation filter is
upsampled by a factor of two by inserting midscale data samples.
PRODUCT HIGHLIGHTS
1. A flexible, low power 2× interpolation filter supporting re-
construction bandwidths of up to 63.3 MHz can be config-
ured for a low or high pass response with 73 dB of image
rejection for traditional baseband or direct IF applications.
2. A “zero-stuffing” option enhances direct IF applications.
3. A low glitch, fast settling 14-bit DAC provides exceptional
dynamic range for both baseband and direct IF waveform
reconstruction applications.
4. The AD9772 digital interface, consisting of edge-triggered
latches and a flexible differential or single-ended clock input,
can support input data rates up to 150 MSPS.
The AD9772 can reconstruct full-scale waveforms with band-
widths as high as 63.3 MHz while operating at an input data rate of
150 MSPS. The 14-bit DAC provides differential current out-
puts to support differential or single-ended applications. A
5. On-chip PLL clock multiplier generates all of the internal high
speed clocks required by the interpolation filter and DAC.
TxDAC+ is a trademark of Analog Devices, Inc.
6. The current output(s) of the AD9772 can easily be configured
for various single-ended or differential circuit topologies.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
World Wide Web Site: http://www.analog.com
© Analog Devices, Inc., 1999
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
替代型号
如果您发现信息不准确，
