5秒后页面跳转
AD9626BCPZ-170 PDF预览

AD9626BCPZ-170

更新时间: 2024-01-30 05:12:57
品牌 Logo 应用领域
亚德诺 - ADI 转换器
页数 文件大小 规格书
36页 1595K
描述
12-Bit, 170 MSPS/210 MSPS/250 MSPS, 1.8 V Analog-to-Digital Converter

AD9626BCPZ-170 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFN
包装说明:HVQCCN, LCC56,.31SQ,20针数:56
Reach Compliance Code:compliantECCN代码:3A991.C.2
HTS代码:8542.39.00.01风险等级:5.66
最大模拟输入电压:1.5 V最小模拟输入电压:0.98 V
转换器类型:ADC, PROPRIETARY METHODJESD-30 代码:S-XQCC-N56
JESD-609代码:e3长度:8 mm
最大线性误差 (EL):0.0342%湿度敏感等级:3
模拟输入通道数量:1位数:12
功能数量:1端子数量:56
最高工作温度:85 °C最低工作温度:-40 °C
输出位码:OFFSET BINARY, 2'S COMPLEMENT BINARY, GRAY CODE输出格式:PARALLEL, WORD
封装主体材料:UNSPECIFIED封装代码:HVQCCN
封装等效代码:LCC56,.31SQ,20封装形状:SQUARE
封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度(摄氏度):260
电源:1.8 V认证状态:Not Qualified
采样速率:170 MHz采样并保持/跟踪并保持:SAMPLE
座面最大高度:1 mm子类别:Analog to Digital Converters
标称供电电压:1.8 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Matte Tin (Sn)端子形式:NO LEAD
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:8 mm
Base Number Matches:1

AD9626BCPZ-170 数据手册

 浏览型号AD9626BCPZ-170的Datasheet PDF文件第2页浏览型号AD9626BCPZ-170的Datasheet PDF文件第3页浏览型号AD9626BCPZ-170的Datasheet PDF文件第4页浏览型号AD9626BCPZ-170的Datasheet PDF文件第5页浏览型号AD9626BCPZ-170的Datasheet PDF文件第6页浏览型号AD9626BCPZ-170的Datasheet PDF文件第7页 
12-Bit, 170 MSPS/210 MSPS/250 MSPS,  
1.8 V Analog-to-Digital Converter  
AD9626  
FEATURES  
APPLICATIONS  
SNR = 64.8 dBFS @ fIN up to 70 MHz @ 250 MSPS  
Wireless and wired broadband communications  
ENOB of 10.5 @ fIN up to 70 MHz @ 250 MSPS (−1.0 dBFS)  
SFDR = 80 dBc @ fIN up to 70 MHz @ 250 MSPS (−1.0 dBFS)  
Excellent linearity  
Cable reverse path  
Communications test equipment  
Radar and satellite subsystems  
Power amplifier linearization  
DNL = 0.3 LSB typical  
INL = 0.7 LSB typical  
CMOS outputs  
FUNCTIONAL BLOCK DIAGRAM  
RBIAS  
PWDN  
AGND  
AVDD (1.8V)  
Single data port at up to 250 MHz  
Interleaved dual port @ ½ sample rate up to 125 MHz  
700 MHz full power analog bandwidth  
On-chip reference, no external decoupling required  
Integrated input buffer and track-and-hold  
Low power dissipation  
REFERENCE  
AD9626  
CML  
DRVDD  
DRGND  
VIN+  
VIN–  
TRACK-AND-HOLD  
12  
12  
ADC  
12-BIT  
CORE  
OUTPUT  
STAGING  
LVDS  
Dx11 TO Dx0  
272 mW @ 170 MSPS  
364 mW @ 250 MSPS  
Programmable input voltage range  
1.0 V to 1.5 V, 1.25 V nominal  
CLK+  
CLK–  
CLOCK  
MANAGEMENT  
OVRA  
OVRB  
SERIAL PORT  
1.8 V analog and digital supply operation  
Selectable output data format (offset binary, twos  
complement, Gray code)  
DCO+  
DCO–  
RESET SCLK SDIO CSB  
Clock duty cycle stabilizer  
Figure 1.  
Integrated data capture clock  
GENERAL DESCRIPTION  
PRODUCT HIGHLIGHTS  
The AD9626 is a 12-bit monolithic sampling analog-to-digital  
converter optimized for high performance, low power, and ease  
of use. The product operates at up to a 250 MSPS conversion  
rate and is optimized for outstanding dynamic performance in  
wideband carrier and broadband systems. All necessary func-  
tions, including a track-and-hold (T/H) and voltage reference,  
are included on the chip to provide a complete signal  
conversion solution.  
1. High Performance—Maintains 64.9 dBFS SNR @ 250 MSPS  
with a 70 MHz input.  
2. Low Power—Consumes only 364 mW @ 250 MSPS.  
3. Ease of Use—CMOS output data and output clock signal  
allow interface to current FPGA technology. The on-chip  
reference and sample-and-hold provide flexibility in  
system design. Use of a single 1.8 V supply simplifies  
system power supply design.  
The ADC requires a 1.8 V analog voltage supply and a differen-  
tial clock for full performance operation. The digital outputs are  
CMOS compatible and support either twos complement, offset  
binary format, or Gray code. A data clock output is available for  
proper output data timing.  
4. Serial Port Control—Standard serial port interface supports  
various product functions, such as data formatting, clock  
duty cycle stabilizer, power-down, gain adjust, and output  
test pattern generation.  
5. Pin-Compatible Family—10-bit pin-compatible family  
offered as the AD9601.  
Fabricated on an advanced CMOS process, the AD9626 is  
available in a 56-lead LFCSP, specified over the industrial  
temperature range (−40°C to +85°C).  
Rev. 0  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2007 Analog Devices, Inc. All rights reserved.  
 

与AD9626BCPZ-170相关器件

型号 品牌 获取价格 描述 数据表
AD9626BCPZ-210 ADI

获取价格

12-Bit, 170 MSPS/210 MSPS/250 MSPS, 1.8 V Analog-to-Digital Converter
AD9626BCPZ-250 ADI

获取价格

12-Bit, 170 MSPS/210 MSPS/250 MSPS, 1.8 V Analog-to-Digital Converter
AD9626BCPZRL7-210 ADI

获取价格

12-Bit, 170 MSPS/210 MSPS/250 MSPS, 1.8 V Analog-to-Digital Converter
AD9627 ADI

获取价格

12-Bit, 80/105/125/150 MSPS, 1.8 V Dual Analog-to-Digital Converter
AD9627_15 ADI

获取价格

12-Bit, 80 MSPS/105 MSPS/125 MSPS/150 MSPS
AD9627_17 ADI

获取价格

1.8 V Dual Analog-to-Digital Converter
AD9627-125EBZ ADI

获取价格

1.8 V Dual Analog-to-Digital Converter
AD9627-150EBZ ADI

获取价格

1.8 V Dual Analog-to-Digital Converter
AD9627ABCPZ-105 ROCHESTER

获取价格

ADC, Flash Method,
AD9627ABCPZ-105 ADI

获取价格

12-Bit, 80 MSPS/105 MSPS/125 MSPS/150 MSPS, 1.8 V Dual Analog-to-Digital Converter