500 MHz, Variable Gain Amplifier
with Automatic Gain Control Detector
AD8367S
1.0. SCOPE
This specification documents the detail requirements for space qualified product manufactured on Analog
Devices, Inc.'s QML certified line per MIL-PRF-38535 Level V except as modified herein.
The manufacturing flow described in the STANDARD SPACE LEVEL PRODUCTS PROGRAM brochure is to be
considered a part of this specification. http://www.analog.com/aeroinfo
This data sheet specifically details the space grade version of this product. A more detailed operational description
and a complete data sheet for commercial product grades can be found at www.analog.com/AD8367.
2.0.Part Number: The complete part number(s) of this specification follows:
Part Number
Description
AD8367R703F
HDR Radiation tested for 100Krads, 500 MHz, Variable Gain Amplifier
with Automatic Gain Control Detector
AD8367L703F
LDR Radiation tested for 50Krads, 500 MHz, Variable Gain Amplifier
with Automatic Gain Control Detector
3.0.
Case Outline
The case outline(s) are as designated in MIL-STD-1835 with package dimensions listed as follows:
Outline letter
X
Descriptive designator
CDFP4-F16
Terminals
16 lead
Package style
Bottom Brazed Flat Pack
Package: F
Pin
Number
Terminal
Pin Type
Pin Description
Symbol
ICOM
ICOM
ENBL
INPT
1
2
3
4
Power
Power
Digital Input
Signal Input
Signal Common. Connect to low impedance ground.
Signal Common. Connect to low impedance ground.
A high activates the device.
200 Ω to ground.
Gain direction control. High for positive slope, low for negative slope. Must be low for AGC
mode operation.
5
MODE
Digital Input
6
7
8
9
10
11
GAIN
DETO
ICOM
OCOM
DECL
VOUT
Analog Input
Analog Output
Power
Power
Analog Input
Signal Output
Gain control voltage.
Detector output. Provides output current for RSSI function and AGC control.
Signal Common. Connect to low impedance ground.
Power Common. Connect to low impedance ground.
Output centering loop decoupling pin.
To be externally ac-coupled to load.
Positive supply voltage. 3.0V to 5.25V. VPSI and VPSO are tied together internally with back to
back PN junctions. They should be tied together externally and properly bypassed.
Positive supply voltage. 3.0V to 5.25V.
High pass filter connection. A capacitor to ground sets the corner frequency of the output
offset control loop.
12
13
14
VPSO
VPSI
Power
Digital Output
Analog Input
HPFL
15
16
Lid
ICOM
ICOM
LID
Power
Power
NC
Signal Common. Connect to low impedance ground.
Signal Common. Connect to low impedance ground.
Not Connected, but can be externally connected to ground.
Figure 1 - Terminal connections.
ASD0016540
Rev.B
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
© 2013 Analog Devices, Inc. All rights reserved.
Fax: 781.326.8703