250 MHz, Voltage Output,
4-Quadrant Multiplier
AD835
FUNCTIONAL BLOCK DIAGRAM
FEATURES
Simple: basic function is W = XY + Z
AD835
X = X1 – X2
X1
X2
Complete: minimal external components required
Very fast: Settles to 0.1% of full scale (FS) in 20 ns
DC-coupled voltage output simplifies use
High differential input impedance X, Y, and Z inputs
Low multiplier noise: 50 nV/√Hz
XY
+
+
XY + Z
X1
W OUTPUT
Y1
Y2
Y = Y1 – Y2
Z INPUT
APPLICATIONS
Figure 1.
Very fast multiplication, division, squaring
Wideband modulation and demodulation
Phase detection and measurement
Sinusoidal frequency doubling
Video gain control and keying
Voltage-controlled amplifiers and filters
PRODUCT HIGHLIGHTS
GENERAL DESCRIPTION
1. The AD835 is the first monolithic 250 MHz, four-quadrant
voltage output multiplier.
2. Minimal external components are required to apply the
AD835 to a variety of signal processing applications.
3. High input impedances (100 kΩ||2 pF) make signal source
loading negligible.
4. High output current capability allows low impedance loads
to be driven.
5. State-of-the-art noise levels achieved through careful
device optimization and the use of a special low noise,
band gap voltage reference.
The AD835 is a complete four-quadrant, voltage output analog
multiplier, fabricated on an advanced dielectrically isolated
complementary bipolar process. It generates the linear product
of its X and Y voltage inputs with a −3 dB output bandwidth of
250 MHz (a small signal rise time of 1 ns). Full-scale (−1 V to
+1 V) rise to fall times are 2.5 ns (with a standard RL of 150 Ω),
and the settling time to 0.1% under the same conditions is
typically 20 ns.
Its differential multiplication inputs (X, Y) and its summing
input (Z) are at high impedance. The low impedance output
voltage (W) can provide up to 2.5 V and drive loads as low as
25 Ω. Normal operation is from 5 V supplies.
6. Designed to be easy to use and cost effective in applications
that require the use of hybrid or board-level solutions.
Though providing state-of-the-art speed, the AD835 is simple
to use and versatile. For example, as well as permitting the
addition of a signal at the output, the Z input provides the
means to operate the AD835 with voltage gains up to about ×10.
In this capacity, the very low product noise of this multiplier
(50 nV/√Hz) makes it much more useful than earlier products.
The AD835 is available in an 8-lead PDIP package (N) and an
8-lead SOIC package (R) and is specified to operate over the
−40°C to +85°C industrial temperature range.
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©1994–2010 Analog Devices, Inc. All rights reserved.
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
